Are you looking for a safe and reliable way to flush your brakes? If so, you might want to consider using Jiffy Lube. Jiffy Lube is a trusted name in the automotive industry, and they offer a number of services that are designed to keep your car running smoothly. One of their most popular services is the brake flush.
What is a brake flush?
A brake flush is exactly what it sounds like – it’s a process of cleaning and lubricating your car’s braking system. By doing this, you can ensure that your brakes work properly and stop quickly when you need them to.
What is a brake flush?
Brake flushes are a service that Jiffy Lube provides to help keep your brakes in good working order. Essentially, a brake flush is a cleaning and lubrication of your brake system. This service is typically recommended yearly or every 2,000 miles, whichever comes first.
Here’s what you need to know about brake flushes:
– Brake flushes help clean and lubricate your brake system.
– Recommended every 2,000 miles or yearly, whichever comes first.
– Can be performed at any Jiffy Lube location.
– Cost is typically around $30.
How to do a brake flush
If you’re experiencing a decrease in brake performance, it may be time to do a brake flush. This procedure cleans and lubricates your braking system, which can help restore lost performance. Here’s how to do it:
1. Park the car in a safe location. If you have to move the car later, park it on a level surface.
2. Drain the brake fluid using a hose or an empty container. Make sure to save any used fluid for later disposal.
3. Remove the cap and bolt that hold the brake caliper in place (1). Turn the caliper so that it rests on the axle (2). carefully pry off the old pads (3) and set them aside. Note: If your car has ever had rotors replaced, you’ll need to remove these too before proceeding with the flush.
4. Push the caliper off of the axle and set it aside. It’s okay if some of the brake fluid drips onto the ground (4).
5. Insert two new pads into the caliper (3), making sure that they are positioned correctly against the rotor (5
What are the benefits of a brake flush?
There are many benefits to having a brake flush done on your car. Brake flush is a procedure that helps to clean the brake pads and rotors, which can help to improve braking performance. Additionally, brake flushes can also help to prevent brake dust from building up on the brakes, which can increase their lifespan. Finally, a brake flush can also help to remove any residual oil or grease that may have accumulated on the brakes over time. Overall, there are many reasons why it is beneficial to have a brake flush done on your car.
Are there any risks associated with a brake flush?
There are a few potential risks associated with a brake flush, but overall they are relatively minor. The most common concern is that the fluid might not be completely cleared out of the system, which could result in problems down the road. Another potential issue is that the fluid might contain contaminants that can damage the brakes. However, these issues are typically only a problem if the flush is done incorrectly or if the brakes are already in poor condition. Overall, a brake flush is a fairly safe procedure and should only be considered if there are signs that the brakes are failing prematurely.
Conclusion
Yes, Jiffy Lube does a brake flush. In fact, their technicians are specially trained to do this type of work and it’s one of the many services they offer. Brake fluid is essential for your car’s braking system, but over time it can build up on the rotors and pads, causing them to wear prematurely and potentially causing a safety hazard. Jiffy Lube can help you keep your brakes performing at their best by flushing them with clean brake fluid every 6 months or so.