Brake flush is a routine maintenance task that you should do on your car at least once every six months. By doing this, you will keep your brakes in top condition and prevent any unexpected problems.
What is a brake flush?
A brake flush is a service that cleans and lubricates the brakes on your vehicle. It is important to have the brakes inspected and flushed every year to keep them working optimally.
How often should a brake flush be done?
A brake flush is typically done every 5,000 to 7,500 miles.
Pros and Cons of using brake flush
Brake flush is one of those services that can either be a life saver or an expensive mistake. Here are some pros and cons of using this service.
How to do a brake flush
If you have ever had to do a brake job, you know that brake fluid can be a real mess. Brake flush is the process of cleaning out all the old brake fluid and replacing it with new. Here is how to do it:
1. Park the car on a level surface.
2. Remove the wheel cylinder cover by unscrewing the four screws on either side of it.
3. Remove the brake caliper by loosening the bolts holding it to the rotor and pulling it off.
4. Remove the two banjo bolts that hold the master cylinder in place and pull it out of the car.
5. Drain any old fluid from the system by pouring a gallon or so down the drain and turning on the vacuum pump until all the fluid has been removed (it should take about 20 minutes).
6. Pour in fresh brake fluid and replace all of the above items, making sure to torque them properly (see instructions below).
7. Reinstall everything in reverse order, making sure not to cross-thread any bolts.
8. Start your car and check for leaks; if there are any, fix them now before proceeding to
Conclusion
Brake flush refers to the act of cleaning and/or adjusting your brakes in order to restore their performance. It’s a simple procedure that can help improve your car’s stopping power, so it’s definitely something you should keep on top of. When you’re ready to do a brake flush, here are some tips on how to do it properly: