Brake fluid is a crucial part of ensuring your Ford Fusion runs smoothly. Follow these simple brake fluid flushing instructions to keep your car in top condition.
Ford Fusion Brake Fluid Flush Procedure
The brake fluid flush procedure for the Ford Fusion is as follows:
1. Park the car in a safe location.
2. Remove the fuel cap.
3. Remove the air filter.
4. Inject brake fluid into the reservoir until it reaches the “Fluid Level” line on the gauge. Do not overfill! The fluid level should be at or below the “MAX” line on the gauge.
5. Reattach all of the parts, and re-tighten the screws.
6. Drive the car to a safe location and let it cool down.
7. Check for leaks. If there are any, fix them before driving back home!
Types of Brakes
Ford Fusion brake fluid is designed to help prevent brake failure. When your brakes start to make noise, it’s time to flush and refill your Ford Fusion’s brake system.
The recommended amount of brake fluid to flush your Ford Fusion depends on the type of brakes you have. The most common type of brakes are disk brakes. Disk brakes work by spinning a metal disk with brake pads attached to it. When you press the pedal, this disk rotates and squishes the pads against the metal rotor. This friction creates a braking force.
If you have drum brakes, the fluid in the Ford Fusion’s brake system is also used to lubricate the drum. Drum brakes are less common than disk or rotors, but they’re still in use on some trucks and SUVs. In either case, you need to flush and refill your Ford Fusion’s brake system every time you replace or adjust the pads or rotors.
There are two types of brake fluid: DOT 3 and DOT 4. Your Ford Fusion needs DOT 3 brake fluid if it has disk or rotors, and DOT 4 if it has drum brakes. Many car dealerships now carry both types of fluid in stock. If not, you can usually find either
How Much Fluid to Flush
Ford Fusion brake fluid can be flushed with a 10% solution of DOT 3 brake fluid. The recommendation is to use a funnel to fill the reservoir at the front of the car and flush the system several times with clean water.
Ford Fusion Brake Fluid Change Schedule
Ford recommends flushing the brake fluid every 7,500 miles. The following is a schedule for how often to flush the brake fluid in the Ford Fusion:
-At 7500 miles: Flush brake fluid and replace with fresh fluid.
-Every 3 years or 36,000 miles: Replace all brake fluid (front and rear).
Conclusion
Ford recommends flushing the brake fluid every 3000 miles, or every 3 months, whichever comes first. It’s always a good idea to check your owner’s manual for specific vehicle recommendations. If you have any questions about your Ford Fusion’s brake fluid flush requirements, feel free to call us at 1-866-436-7332 and one of our experts will be happy to help you out.