Brake fluid is a vital part of your vehicle’s braking system. Regularly flushing the brake system with clean brake fluid will keep your brakes operating at their best and give you long-term peace of mind.
The Purpose of a Brake Flush
When you do a brake flush, you’re removing any debris that may have built up on your brake pads over time. This can help to improve the braking performance of your car.
The frequency of a brake flush will depend on a variety of factors, including how often your brakes are used and your car’s make and model. However, generally speaking, you should do a brake flush every six months or so.
When to Perform a Brake Flush
Brake flush is a periodic maintenance task that is required on most vehicles. Brake flush is typically performed at 6, 12, and 18 months or when the brake pads are replaced.
A brake flush consists of flushing the brake system with fresh fluid to remove any contaminants that may have built up over time. This will help to prolong the life of the components in the system and ensure consistent braking performance. The frequency of a brake flush depends on a number of factors such as vehicle make and model, driving habits, and type of brake pad being used. However, it is typically recommended that a brake flush be performed every 6 months on most vehicles.
Types of Brake Flushes
When it comes to brakes, there are a few types you should know about. There is the manual flush, which is when you take the brake pedal all the way to the floor and release it. This flushes the brake fluid out of the system and into the drums. The semi-automatic flush is when your car’s automatic braking system does it for you. The push-flush is when you use a plunger or vacuum cleaner to suck up fluid from underneath the brake pads and hoses.
How to Perform a Brake Flush
A brake flush is a simple procedure that can help clean and lubricate your braking system. This is especially important if you use your brakes often, as dirty or dry brakes can cause serious problems. Here are instructions on how to perform a brake flush:
1. Park the car in a safe place.
2. Remove the wheel and tire.
3. Open the bleed valve on the caliper (if equipped). Bleed the brakes until there is no more fluid coming out of the valve.
4. Remove the Brake Fluid Reservoir Cap and pour about 1 cup of brake fluid into the Reservoir. Replace the Reservoir Cap and tighten it using wrenches provided.
5. Remove the Brake Fluid Filter and pour about 1 cup of brake fluid into the Filter Housing. Replace the Filter Housing and tighten it using wrenches provided.
6. Pump the brakes several times until all fluid has been emptied from the system into a container or onto the ground nearby.