Brake fluid can become contaminated with rust and other contaminants over time, which can lead to reduced braking performance. If you’re experiencing significant brake performance issues, it might be a good idea to flush your brake fluid system and replace the old calipers. This guide will show you how!
How to Flush Brake Fluid Bypassing Old Calipers
If your car has an old brake fluid bypass system, you can flush it and improve braking performance. The process is simple: remove the old calipers, bleed the system, and replace the calipers. Here’s how to do it.
What is Brake Fluid Bypassing and What are the Symptoms?
Brake fluid bypassing is an issue that can cause many different symptoms depending on the severity. The most common symptom is a loss of braking performance. In some cases, the brake fluid will not be able to reach the brakes and this can lead to a complete loss of braking ability. If you are experiencing any of these symptoms, it is important to get your car inspected as soon as possible.
Brake fluid bypassing can be caused by a number of different factors, most of which are related to the age of your car’s brakes. Over time, brake pads and discs can wear down and become less effective. This can cause brake fluid to seep past the calipers and into the ABS lines. Over time, this can create a condition called brake fluid bypassing.
If you are experiencing any of these symptoms, it is important to get your car inspected as soon as possible. A qualified technician will be able to diagnose the issue and provide you with a solution.
How to Fix Brake Fluid Bypassing on Your Vehicle
If you’re noticing a brake fluid smell or your brakes are not working as well as they used to, it may be time to take action and flush your brake fluid bypassing old calipers. This is a relatively easy and inexpensive fix that can save you money in the long run. Here’s how to do it:
1) Locate the brake fluid reservoir on the vehicle. It will usually be located behind the front or rear of the driver’s seat.
2) Remove the cap on the reservoir and wait until all of the air has been expelled from it.
3) Use a funnel to pour about 1/2 cup of brake fluid into the reservoir. Remember to use fresh brake fluid every time you flush your system. Older fluids will cause problems with your brakes.
4) Replace the cap on the reservoir and reattach it to the vehicle using bolts that should come with the reservoir. Make sure to tighten these bolts evenly, otherwise you may experience problems with your brakes later on.
5) Drive your vehicle slowly down a straight section of road until all of the brake fluid has been flushed out of the system. Do
Conclusion
If you’ve been having trouble getting your car to stop on a dime, it might be time to have the brake fluid flushed and the old calipers replaced. Bypassing the old calipers with fresh brake fluid can help your car stop more quickly and easily. If you’re not sure how to do this, or if you need some help finding a qualified mechanic, don’t hesitate to call us at (888) 473-9393. We would be happy to assist you in any way we can!