If you’re like most people, then you probably take good care of your car – giving it a good cleaning every week, replacing worn out parts as soon as possible, and making sure the trim is properly maintained. But what if something goes wrong? What if the trim on your car starts to fade in color, or gets damaged in some other way?
In this article, we’re going to show you how to easily restore faded plastic trim on your car – no matter what the cause may be. By following our simple tips, you’ll be able to restore the trim on your car to its original condition in no time at all!
What You’ll Need
If you have faded or damaged plastic trim on your car, there are a few things you can do to restore it. You’ll need some basic supplies, including a hair dryer, cleaner, and a piece of cloth. Here’s how to do it:
1. Start by cleaning the trim area with a cleaner. Make sure to get into all the crevices and corners.
2. Turn on the hair dryer and hold it against the trim area for several minutes until the trim is hot and bubbly.
3. Carefully remove the hot trim with a cloth, being careful not to burn yourself.
How to Do It
If you have faded or cracked plastic trim on your car, there are a few easy steps you can take to restore it. First, use a degreaser to remove any dirt or dust from the trim. Next, apply a sealant specifically designed for plastics to the area that needs restoration. Let the sealant dry completely before applying new plastic trim.
Tips For Success
When your plastic trim starts to fade, it can become a hassle to restore it to its former glory. Fortunately, there are a few easy steps you can take to get the job done right.
First, make sure that you have the right supplies on hand. Needle-nose pliers, sandpaper, a vacuum cleaner with the hose attachment, and methylated spirits are all necessary for this project.
Next, start by cleaning the faded area with sandpaper. Be sure to use enough pressure so that the trim comes off in small pieces. Use a vacuum cleaner with the hose attachment to clean up any excess sanding dust.
Now it’s time for the methylated spirits. Pour a small amount of spirits onto your work surface and spread it around with your hands. Rub the methylated spirits into the trim until it’s completely coated. Make sure to work quickly so that the alcohol doesn’t evaporate.
Finally, use needle-nose pliers to attach the trim pieces one at a time to your work surface using moderate pressure. Be sure to keep an eye on the clock so that you don’t let the methylated spirits dry out too quickly. Once the trim is attached, use a vacuum cleaner with the hose attachment to clean up any excess alcohol.