Is Power Steering Fluid Corrosive To Rubber

One of the most common car repairs that drivers face is the need to replace power steering fluid. Unfortunately, power steering fluid can also be corrosive to rubber. In this article, we will discuss the risks and benefits of using power steering fluid, as well as recommend a sealant that is specifically designed to protect rubber components from corrosion.

What is Power Steering Fluid?

Power steering fluid is a type of lubricant used in automobiles. It is typically composed of water, oil, and a variety of additives to help prevent corrosion and keep the system working properly.

One common concern with power steering fluid is that it can be corrosive to rubber. This can cause damage to the system and increase the chances of failure. It is important to keep power steering fluid clean and free from contaminants to avoid this problem.

How does Power Steering Fluid Corrosive To Rubber Work?

Power steering fluid is a type of hydraulic fluid that is used in automobiles to provide directional control for the steering mechanisms. Power steering fluids are commonly made up of a blend of hydrocarbons and glycols, which makes them both durable and flexible.

One common concern with power steering fluids is their ability to corrode rubber components. Rubber is an organic material that is sensitive to corrosion, which can lead to deterioration in its performance. When power steering fluid contacts rubber, it can transfer corrosion products from the fluid to the rubber. This process can cause rubber to deflate and become brittle, which can lead to decreased grip and control in the steering system.

How do I Check If My Power Steering Fluid is Corrosive to Rubber?

If you’re concerned that your power steering fluid may be corrosive to rubber, there are a few ways to test for it. One simple way is to pour a small amount of the fluid onto a clean surface, such as a white cloth, and wait 30 minutes. If the fluid has caused any damage to the cloth, you may have a problem. You can also check the fluid’s pH level, which should be below 7.0. Finally, you can test for corrosion by using a steel ball on a wire loop. If the ball quickly disappears into the fluid, it’s likely that corrosion has occurred.

See also  Do You Have To Bleed Power Steering Lines

What can I do if My Power Steering Fluid is Corrosive to Rubber?

If you are experiencing power steering fluid corrosion to rubber, there are a few things that you can do in order to try and fix the issue. Firstly, it is important to determine the cause of the corrosion. If it is due to dirty or worn parts on the power steering system, then it may be necessary to clean or replace those parts. If the problem appears to be due to a chemical reaction between the power steering fluid and rubber, then it may be necessary to replace both components.

Conclusion

Yes, power steering fluid can corrode rubber components in a vehicle’s power steering system. This is particularly true if the fluid has an acidic or basic pH, or if it contains metals that are soluble in water. In order to prevent corrosion, always use a quality power steering fluid and keep the system clean.

DynoCar is the best place to find information on all things cars, whether it be a car buying guide or how to change your oil. We’ve made finding and staying in touch with car information easy and fast.

Resources

Guides

About Us

Contact

Contact

DynoCar - All About Cars

(440) 999 3699

590 Monterey Blvd San Francisco, CA 94127

Information contained herein is for informational purposes only, and that you should consult with a qualified mechanic or other professional to verify the accuracy of any information. DynoCar.org shall not be liable for any informational error or for any action taken in reliance on information contained herein.