Your car’s power steering system is essential in keeping you on the road safely. But if it’s not working properly, you might be in for a long and frustrating ride. In this article, we’ll look at some of the common symptoms of a power steering system issue, and show you how to diagnose and fix them.
What is Transmission Fluid
Transmission fluid is used in the power steering system of a car. It helps to move the power from the engine to the wheels. Transmission fluid is made up of different types of fluids and oils.
How to Use Transmission Fluid
If your car has automatic transmission, you probably don’t need to use transmission fluid. Automatic transmissions use fluid called “transmission fluid” to help the gears move to their correct position.
If your car has a manual transmission, you’ll need to use transmission fluid. Manual transmissions use a cable mechanism between the engine and the transmission that helps turn the gears.
When to Change Transmission Fluid
When is transmission fluid in your car due for a change? That depends on the make and model of your car. Audi, BMW, Ford, Jaguar, Nissan, and Volkswagen all say to check the fluid level every 7,500 miles or every 3 years, whichever comes first. Honda says to check it every 12,000 miles or every 3 years, whichever comes first. Check your owner’s manual to see which interval your specific make and model falls under.
In any case, always replace the transmission fluid when the level is low or when there is visible corrosion on the internal parts of the transmission. Transmission fluid acts as a lubricant between the gears in your car’s transmission and also helps keep them from grinding against each other. Over time, this can cause wear and tear on your transmission which can then lead to problems like shifting difficulties or even broken gears.
Conclusion
Yes, you can use transmission fluid in the power steering. Fill up the reservoir as usual, then add a few drops of transmission fluid. Turn the car on and let it idle for about 10 minutes to mix the fluid with the oil and grease in the system. Keep an eye on your levels (the manual recommends adding 1/4 teaspoon of fluid per quart of oil) and make sure to top off as needed.