If your BMW is having trouble turning in the rain, it might be time to check the power steering fluid. Here’s how to do it: Step 1 – Park the car on a level surface and turn the wheel until the car comes to a stop. Step 2 – Remove the front wheel and use a flashlight to look at the power steering pump. If it’s leaking, you’ll see liquid seeping out of it.
How To Check Power Steering Fluid
If your BMW is experiencing difficulty steering, it may be time to check the power steering fluid. The power steering system uses a fluid to help guide the car. Over time, this fluid can become contaminated with dirt and debris, which can cause the steering to become difficult or even impossible to use.
To check the power steering fluid, first make sure that the car is parked on a level surface. Next, remove the access panel near the rear of the car. Underneath this panel is a reservoir that holds the power steering fluid.
To check the level of the power steering fluid, first remove the cap from the reservoir and fill it to within two-thirds of its capacity with clean water. Then, replace the cap and wait for a few minutes for the water to dissipate. Once done, you can measure how much water has been left in the reservoir using a hydrometer.
If there is too much water in the reservoir, it means that it is time to replace the power steering fluid. If there isn’t enough water in the reservoir, then it means that either there is no contamination present or that it can be cleaned up relatively easily using a garden hose.
What To Look For In Power Steering Fluid
If you’re an owner of a BMW, then you’re likely familiar with the automaker’s excellent power steering. This system is essential for making parking maneuvers and turning in tight spaces a breeze, and it’s usually well-maintained. However, if your power steering fluid is low or empty, you may experience decreased performance and difficulty in steering. In this article, we’ll outline what to look for when checking your power steering fluid level, so that you can make sure everything is in good shape.
First and foremost, you’ll want to make sure that the power steering fluid level is within the manufacturer’s specifications. If it’s not, you may experience decreased performance and difficulty in steering. Second, always check the color of the fluid. If it’s yellow or brown, then it’s time to replace the fluid. Finally, make sure there are no signs of leakage or contamination. If there are, then your power steering system may be malfunctioning and need to be repaired or replaced.
How To Replace Power Steering Fluid
If your BMW is having trouble with its power steering, you may need to replace the fluid. Here’s how to do it:
1. Park the car so that the front wheels are straight ahead, with the gas and brake pedals both at the floor.
2. Turn off the ignition and remove the key (if applicable).
3. Open the trunk lid and remove the spare tire.
4. Remove the two screws securing the power steering reservoir cover (1) and remove cover (2).
5. Use a Phillips head screwdriver to loosen cap (1) on bottom of reservoir (3) and pour out old fluid. Pour in new fluid until cap (1) is flush with top of reservoir (3). Replace cover (2) and screws (3).
6. Put everything back together, reversing steps 1-5.
Conclusion
If you’re experiencing issues with your BMW’s power steering and you don’t know how to check the fluid level, this guide will help. By following these simple steps, you’ll be able to diagnose and fix any power steering problems before they become serious. If you still can’t get your car to steer properly, take it in for a tune-up or a new power steering pump. Thanks for reading!