If you’re having trouble getting the pulley off of a power steering pump, here’s how to do it.
What is a Pulley?
When your car is in motion, the power steering pump pulls and pushes the belt to turn the steering wheel. The belt passes around a pulley on the engine or axle, and this pulley is connected to the pump. If the belt slips off of the pulley, it can cause your car to stop moving.
The easiest way to check if the pulley is loose is to remove it and spin the wheel while observing how much resistance you feel. If the belt slips off of the pulley frequently, it may need to be replaced. You can also try using a wrench to tighten or loosen the bolt that holds it onto the engine or axle.
How to Remove a Pulley from a Power Steering Pump
Pulleys are common components on power steering pumps, and can be a challenge to remove. This article will provide instructions on how to remove a pulley from a power steering pump.
To begin, identify the pulley that needs to be removed. On most pumps, the pulley is mounted on an axis that runs in a vertical direction.
To remove the pulley, use a screwdriver to pry off the metal hub that surrounds the pulley. Once the hub has been removed, use a wrench to unscrew the pulley from the pump shaft.
What to Do if the Pulley Comes Off in Your Hands
If the pulley comes off in your hands, there are a few things you can do to get it off.
The first thing you can do is try to use the leverage of your body to try and pry it off. If that doesn’t work, you can use a wrench or another tool to twist it off.
If none of those options work, you can try using a chisel or a hammer to break the pulley off.
Tips for Safe Removal of a Pulley
Pulleys can be tricky to remove, especially if they are stuck on the power steering pump. Here are some tips for safe removal:
1. Use a breaker bar or a vise to grip the pulley tightly and pull in opposite directions.
2. If the pulley is stuck on the pump, use a screwdriver or a socket wrench to gently pry it off while holding onto the bar.
3. Be careful not to damage the pump or pulley while removing them.