If you’re like most car owners, you’ve probably had to pull a power steering pulley on your own at one time or another. While it may not seem like a difficult task, pulling a pulley without the proper tool can be really frustrating. In this article, we’ll show you how to do it using the proper techniques and tools, so that you can avoid any problems in the future.
What You’ll Need
In order to remove a power steering pulley without the use of a puller, you’ll need the following:
-A powered screwdriver
-Pliers
-Socket wrench
-Pulley removal tool
-ratchet and extension
-Torx socket
-10 mm socket
-Wrench
Start by removing the screws that hold the air intake on either side of the engine. These screws are located near the top of the engine and can be accessed by removing the air ducts. Next, remove the four bolts that hold the cover on top of the engine. Finally, remove the cover. This will reveal the power steering pulley. (Note: If you have a manual transmission, you will also need to remove the gearbox cover.)
To remove the power steering pulley without using a puller, start by powering up your screwdriver and placing it in between the pulley and car body. Hold onto one end of the pliers and use them to grip onto the other end of the screwdriver while pulling it towards you. Once it’s free, use your socket wrench to unscrew it from its mount. Be sure to keep an eye on your fingers
How to do it
If you’re like most people, you probably don’t have a puller handy when it comes time to take your power steering pulley off. Fear not! Follow these instructions and you’ll be able to do the job without any help.
First, make sure that your vehicle is parked on a level surface. You’ll also need some sturdy objects to use as makeshift pullers.
Next, find the bolts that hold the pulley in place. Remove them using a Phillips head screwdriver. Make sure that you note the locations of the bolts so that you can replace them correctly when you put everything back together.
Now it’s time to use your makeshift pullers. Place one object underneath each bolt, and start turning it in a clockwise direction. Keep turning until the bolt pops out of the pulley.
Tips for Success
If you’re considering pulling a power steering pulley on your own, there are a few things you need to know in order to have a successful job. Here are some tips to get you started:
1. Have the right tools. Power steering pulleys can be heavy, so having the right tools will help make the job easier. You’ll need a puller and an axle wrench.
2. Pre-heat the pulley before starting. This will help reduce the chance of damaging the pulley or the belt.
3. Use a J-hook tool to loosen the bolt holding the pulley in place. Then use the puller to remove it from the vehicle.
4. Once the pulley is free, carefully remove it from the vehicle and store it in a safe place. It’s important to note that power steering belts can be expensive to replace, so it’s worth taking care when removing and storing this type of equipment.