Have you ever had to remove power steering fluid from a concrete driveway? If so, you know that it can be a messy and time-consuming task. In this article, we’ll show you how to do it safely and without damaging the driveway.
What You’ll Need
If you’ve ever had to remove power steering fluid from a concrete driveway, you know it’s a rather involved process. Here’s what you’ll need to get the job done:
-Towel or cloth
– bucket
– Power steering fluid removal tools (see below)
– Jack
– Wheelbarrow
– Hammer
– Chisel or saw
– Stud finder or screwdriver
– Jigsaw or sawzall
– Clean rags or paper towels
– Vinegar or bleach
– Water hose
– Bucket stand or container to catch fluid
1. Remove any objects that may get in the way of the operation. This includes trees, shrubs, and poles. If there are any large rocks around, move them out of the way.
2. Locate the area where the power steering fluid leak is coming from. On a concrete driveway, this may be easy to spot since it will usually be near one of the wheels. Look for cracks in the surface, and spray PowerSteering Fluid Stop® around the area to try and stop the leak. If the leak is coming from underneath the driveway, you’ll have to dig down into it. Use
How To Do It
If you have a concrete driveway that needs to be power-steered leveled, the first step is to remove the power steering fluid. You’ll need a Bucket, Jug or Drainer, Foam Gun and Power Steering Fluid.
1. Start by finding a spot on your driveway where you can safely park your car.
2. If your driveway is curvy, make sure you have someone to help you hold onto the edges of the curb while you drive the fluid off the driveway.
3. Pour the fluid into your bucket or jug and use your foam gun to shoot a stream of bubbles up into the air. Keep blasting bubbles until all of the fluid has been expelled from the system.
4. Drive around the driveway once or twice to make sure there are no leaks and then stop driving and let the fluid drain naturally into the ground or into a storm drain.
What to Do If It Doesn’t Work
If you’ve tried everything and your driveway still won’t move, it’s time to call in the professionals. Power steering fluid is a vital component of your car’s function, so it’s important to remove it when necessary. Here are three steps to take if power steering fluid is not budging the driveway:
1. Check for damage: If there is any obvious damage to the power steering pump or hose, the issue may be more complicated than just a lack of fluid. In this case, you’ll need to have the car checked out by a mechanic.
2. Clear the drain: Remove any obstructions from the driveway’s drain and let the fluid drain away. This could include any large rocks or debris in the way.
3. Check for leaks: Close off all other possible sources of leakage and pump the fluid back into the system several times using a garden hose. If there is still no result, it may be time to call a professional.