If you’re like most people, you probably take your car for granted. You just hop in and start driving to your destination – without giving much thought to how your car works. But if you want to keep your car running smoother and longer, then you need to know about preventive maintenance. This guide will teach you the basics of keeping your car running like a top!
What You’ll Need
Assuming you’re looking to jack your car, you’ll first need to locate the lugnuts that hold your wheels onto the axle.
Next, find a sturdy object to use as a support for the car. I recommend using a large rock or something similar. Make sure the object is low enough so you can stand on it and reach the lugnuts.
Next, get a Phillips head screwdriver and remove the lugnuts. Be careful not to lose them! Once they’re removed, use a wrench to loosen the bolts that hold the wheel on.
Finally, use your screwdriver to loosen the bolts that connect the hubcap to the wheel. Chuck one end of a rope between the bolt on the hubcap and the bolt on the wheel and tie it off. Now pull up on the rope until the hubcap comes off and set it aside.
You’re now ready to jack your car! Simply place one end of your rope under one of the car’s front tires and use your other end to lift it off of the ground. Make sure you keep an eye on your tire pressure while jacking; if it goes below PSI, simply put it back on and tighten everything back up
The Basic Technique
There are a few basic steps you need to follow to jack your car.
1. Locate the jack points on the car. These will be either the bottom of the wheel well or the center of the trunk.
2. Insert a jack into one of the jack points, making sure the lift is high enough so that the car does not touch the ground.
3. Raise the jack until it is at or near the height of the car’s top surface.
4. Repeat steps 2-4 for each of the other jack points. Be sure to use straps if necessary to ensure that your car does not fall over while you are jacking it up.
Tips for Better Results
If you’re looking to jack your car, here are a few tips to help you get the most out of your experience.
1. Make sure the surface you’re trying to jack is solid. If it’s not, your jacking effort will be wasted and you’ll likely end up damaging your car or yourself.
2. Position yourself in a stable position. It’s important that you stay upright and stable while jacking your car, in order to avoid injury.
3. Use the correct tool for the job. There are many different types of tools available for jacking your car, so make sure you use the one that’s best suited for the task at hand.
4. Be cautious when lifting your car. Always use caution when lifting any object, especially if it’s heavy or unstable.
How to Prevent Jacking
When you park your car, it’s important to take a few precautions to prevent someone from jacking your car. Here are some tips:
Secure Your Vehicle
Make sure all of the windows and doors are locked and that the car is secured with a security system. If you can’t do these things yourself, ask a friend or family member to help you.
Install Security Systems
If possible, install security systems that will notify you if your car is stolen or if it has been jacked. These systems can also help identify who has jacked your car.
Avoid Leaving Anything in Your Car
Don’t leave anything in your car that could be used to break into it, like purses or wallets. Also, make sure not to leave anything inside the car that could be damaged by thieves, like keys or laptops.
Keep an Eye on Your Stuff
Keep an eye on your stuff while you’re parking. If something seems suspicious, don’t hesitate to call the police.