Have you ever been in a situation where you had to start your car with the key in the ignition but the engine wouldn’t turn over? If so, you’re not alone. This problem is known as a “dead battery” and it can be frustrating as hell. In this blog post, we will show you how to fix a bad ignition coil and get your car started once again. by following our simple instructions, you should be able to get your car running like new again in no time.
What to do if your car has a bad ignition coil
If your car has a bad ignition coil, there are several things you can do to try and fix the problem. Some automakers have specific procedures for removing and replacing the ignition coil, while others may require that you take your car to a mechanic. In either case, following these steps should help get your car back on the road:
1. Remove any obstructions from the spark plug area. This includes anything that could be blocking the air flow needed to fire the engine.
2. Make sure all of the engine’s electrical accessories are unplugged and free from objects that could short out or interference with the spark plugs.
3. Check all of the fuses in your car and replace any that appear blown or cracked.
4. Remove the spark plugs and clean them well using a wire brush if necessary. Use a copper conductor on one electrode and an aluminum conductor on the other electrode when reinstalling them to make sure they fire properly.
5. Test drive your car with the spark plugs removed to ensure everything is working properly before putting everything back together.
How to fix a bad ignition coil
If your car won’t start because of a bad ignition coil, there are a few things you can do to try and fix the problem. Here are four tips:
1. Replace the ignition coil. This is the most common solution and it’s usually the best one. If your car has been sitting for a while, the coil may have gone bad and needs to be replaced.
2. Try a new battery. If your car won’t start because of a bad coil, it could also be that the battery is drained and needs to be replaced. Check the level of charge before trying to start your car and replace the battery if necessary.
3. Check for corrosion on the connectors. Sometimes corrosion will cause problems with electrical connections, preventing cars from starting up correctly. Clean any corrosion off of connector pins with a wire brush or steel wool before trying to start your car again.
4. Reset the ECM (electronic control module). If none of these solutions work, you might need to reset the ECM which will restore some default settings and hopefully allow your car to start up correctly again
Conclusion
If you’re having trouble starting your car, it might be because of a bad ignition coil. This is a common issue that can be fixed with a simple repair, so if you’re experiencing problems trying to get your car started, don’t hesitate to bring it in for service.