Summer is officially here, which means it’s time to break out the air conditioning. However, before you do, be sure to check to see if your car’s fan is working properly. If not, it might be time to get it wired up for a summer breeze. In this blog post, we will show you how to wire an electric fan to cars ignition in just a few simple steps. By following our instructions, you will be able to keep your car comfortable all season long!
What You’ll Need
In order to wire an electric fan to cars ignition, you will need the following:
-An electric fan
-A power cord
-A voltmeter
-A grounding strap
-Wire nuts and screws
-An electrical outlet
-A car battery connector (optional)
1. Disconnect the negative battery lead from the car battery. This can be done by removing the cover on the car Battery or by using a 7 mm allen key. NOTE: If you are not going to use a car battery connector, make sure that the black and red wires are separated by at least 2 inches (5 cm). If they are not, you will need to trim the wires before connecting them.
Connect one end of the power cord to the electric fan. Connect the other end of the power cord to an appropriate electrical outlet. Make sure that both cords are plugged in securely. NOTE: If your electric fan has an on/off switch, turn it off before wiring it up.
1) Using a voltmeter, check to see if there is electricity coming out of the electric fan (if there isn’t already). Check for 12 volts at either end of the power cord
How to Wire an Electric Fan to a Car Ignition
There are a few ways to wire an electric fan to cars ignition. One way is to use an extension cord and connect the fan’s plug to the car’s cigarette lighter socket. Another way is to use a direct wiring connection, which means that the fan will have its own circuit breaker. Whichever method you choose, there are a few things you need to know in advance.
First, make sure that your electric fan is properly grounded. This means connecting it directly to the car’s battery (or a grounding cable), rather than using an extension cord. Second, make sure that your car has a compatible electrical system. Many cars now come equipped with both cigarette lighter and direct-wire connections for fans, but not all do. Third, check your fan’s wiring diagram before you start rewiring. If you don’t know how to get one, your car dealer or mechanic may be able to help you locate one. Finally, be sure to test the circuit before you turn on the fan by turning off the car and then testing the outlet where the plug goes into the car.
Optional Wiring: Switching the Fan On and Off
Installing an electric fan in a car can help to keep you cool on hot days or to circulate air when the air conditioning is not working. Follow these steps to connect your fan to your car’s ignition:
1. Remove the cover over the electric fan motor. There are usually two screws holding this cover in place.
2. Connect one black wire from the electric fan motor to one black wire from the car’s battery.
3. Connect one red wire from the car’s battery to one red wire from the electric fan motor.
4. Connect one white wire from the electric fan motor to one white wire from the car’s headlight harness.
Tips for Safer, Easier wiring
The best way to wire an electric fan to a car’s ignition is to use the factory connector. This connector is typically blue and has a male plug on one end and a female receptacle on the other. The easiest way to find this connector is to remove the plastic cover over the car’s battery. There are often three screws visible near the firewall. Loosen these screws and lift off the cover. Then you can see the connectors for the fan and lights.