When you take your car in for servicing, it’s important to make sure that the plastic trim on the outside is properly cleaned. Otherwise, you may find yourself struggling to get car wax off of it later on. Luckily, there are a few methods you can use to get car wax off of plastic trim without having to resort to harsh chemicals. In this article, we’ll discuss a few of these methods and show you how they can help you clean your plastic trim without any problems.
What You’ll Need
If you want to remove car wax from plastic trim, you’ll need:
-A cloth or paper towel
-A bucket of warm water
-Car wax remover
-Microfiber cloth or a Naples scrub pad
-Protective eyeglasses or goggles
1. Wet the cloth or paper towel with warm water and wring it out. If the trim is really dry, you may need to add more water.
2. Squeeze some car wax remover onto the microfiber cloth or scrub pad. Make sure to apply enough pressure so that the liquid can spread evenly over the surface.
3. Working in small sections, use the cloth or scrub pad to rub the wax off of the plastic trim. Be gentle; if you rub too hard, you may damage the trim.
4. Pour a little water onto your hand and use it to clean any excess wax off of the trim. Wipe down any areas where fingerprints or streaks remain.
5. Wipe off any remaining wax with a dry piece of cloth or paper towel and then rinse all of the materials used in steps 2 through 4 in the bucket of warm water.
Step-By-Step Guide
If your car has plastic trim, such as on the sides or roof, getting car wax off of it can be a challenge. There are various methods that you can use to try and remove the wax, but some are more effective than others.
One method that many people use is using boiling water. Boil a pot of water and pour it over the plastic trim. Let the water cool and then use a cloth or a brush to scrub the wax off.
Another popular method is using alcohol-based hand sanitizer. Wet down the area where you want to remove the wax and then spray some hand sanitizer onto it. Rub it into the surface with your hands until the wax is gone.
Some people also recommend using toothpaste on plastic trim. wet down the area where you want to remove the wax and then add enough toothpaste to cover the surface. scrub it into the surface with your fingers until all of the toothpaste is gone.
Conclusion
Getting car wax off of plastic trim can be a pain, but there are a few tricks that will make the process much easier. Start by using a hairdryer to warm up the wax slightly. This will help it start to detach from the plastic. Then, use a polish pad or microfiber cloth to work the wax off of the trim. Finally, rinse everything clean with cold water and dry it off thoroughly before putting your car back together.