Waxing your car is a popular way to keep it looking good. After all, it’s one of the few things you can do to make a dent in the pile of dirt and mud that accumulates over time. Unfortunately, wax can be really stubborn. If it hasn’t been removed by hand yet, using a wax removal product may not work. In this blog post, we will show you how to get wax off car trim without any help from products.
Identification of the Problem
Wax can be a nuisance to remove from car trim. There are various methods that can be used, but the most effective is using boiling hot water. Helpful tools include a pot, scrubber, and towel. Be careful not to burn yourself while removing wax.
Cleaning and Prepping the Area
If you have ever tried to get wax off car trim, you know that it can be a challenging task. Wax is tough to remove and often leaves residue behind. There are a few methods that can help get wax off car trim easily.
One way is to use a solvent. Certain solvents, like acetone or denatured alcohol, will dissolve the wax and allow you to remove it with a cloth or sponge. Make sure to wear gloves and eye protection when using these solvents, as they can be harmful if ingested.
Another method is to use boiling water. Boil some water and pour it over the waxed area. Wait until the wax has melted and then use a cloth or sponge to remove it. Again, be careful not to burn yourself with the hot water.
If neither of those methods work, there is always brute force! Grab a hammer and start pounding on the waxed area until it breaks free. Be careful not to damage the car surface beyond repair!
Applying pressure with a cloth or a brush
If you have a car with an exterior trim that is waxed, there are a few ways to remove the wax. Applying pressure with a cloth or a brush will work faster than using a wax cleaner. If you are using a cloth, be sure to apply moderate pressure and avoid rubbing too hard. It is also helpful to use warm water and a soft cloth to help soften the wax. Once the wax is softened, you can easily remove it with your hands or a clean cloth. If using a brush, be sure to start from the center of the trim and work your way out. Apply gentle pressure and avoid scrubbing.
Using a Wax Stripper
There are a few different ways to remove wax from car trim. One is to use a wax stripper. Wax strippers are available at most hardware stores and can be used on both hard and soft wax. To use a wax stripper, first wet the area you want to remove the wax from with water. Next, use the stripper on a rough side to remove the wax. For softer waxes, use the stripper on a fine side. Once all of the wax has been removed, dry the area off with a towel.
Rinsing and Wiping Away the Stripped Wax
If you’ve stripped wax from your car’s trim, there are a few things you can do to get the job done. Rinsing and wiping away the stripped wax can be done manually or with a car washing solution. For manual methods, people usually use a bucket and sponge. For car washes, people usually use a bucket and hose.
Finishing Up
If you have wax on your car trim, it’s time to get it off. There are a few different ways to do this depending on the type of wax and the material of your car trim.
Wax on Metal:
If the wax is on metal, you’ll need to use a polishing cloth or a microfiber towel to remove the wax. Make sure that you are using a soft cloth or towel so that you don’t scratch the surface. Apply pressure with your cloth or towel and work in circular motions. Be sure to keep up the pressure until all of the wax has been removed.
Wax on Plastic:
If the wax is on plastic, you can use a solvent such as rubbing alcohol or acetone to remove the wax. Start by spraying some of the solvent onto a clean, dry cloth and wring out excess liquid. Wipe down the entire area where the wax is located. Use more solvent if needed and repeat until all of the wax is gone.