If you have suffered from swirl and abrasion marks on your fiberglass shower after using car wax, there is hope! Follow these steps to see if car wax can remove the marks.
Swirl and abrasion removal
The most common cause of swirl and abrasion on fiberglass shower walls and doors is the accumulation of soap scum and water droplets. This build-up can occur over time, especially if the shower is not used often.
One effective way to remove swirls and abrasions from your shower is to use car wax. To do this, apply a liberal amount of car wax to the surface of the wall or door. Work the wax into the crevices, using a cloth or brush. Let the wax dry completely before washing the surface with soap and water.
How car wax works
When it comes to removing swirls and abrasions from fiberglass shower surfaces, car wax is generally considered to be the best option. While there are a few other products that may work, car wax is the most effective due to its high lubricity. This property allows it to attract and hold dirt and dust particles, which in turn makes them easy to remove. Additionally, car wax is also known for its anti-static properties, which helps to reduce the risk of static sparks causing damage.
Preparing the surface
If you have a Fiberglass shower, you’ll need to remove any swirls and abrasions from the surface before you wax. The best way to do this is with a sandpaper block. First, clean the surface of the shower with a mild soap and water. Next, dry the surface completely. Next, place the block of sandpaper on top of the wet surface and start rubbing it in a circular motion. Continue doing this until the surface is smooth.
Waxing the surface
If you are looking to remove swirls and abrasion from fiberglass shower enclosure, car wax is a great option. The wax will adhere to the fiberglass and help to smooth out the surface. The wax can also be used to remove minor scratches and dings from the surface.
To use car wax on fiberglass, start by cleaning the area with a degreaser. Then, polish the area with a low-grit abrasive paper before applying the wax. Allow the wax to dry completely before buffing it off.
Wiping down the area
You might be thinking that car wax won’t do much to remove swirls and abrasions from fiberglass, but you would be wrong. In fact, car wax is a great way to clean up the surface and remove any existing scratches or swirls. Just make sure you apply a light coat of wax and then wait until it has dried before moving on to the next step.