If you’ve ever tried to start your car with a screwdriver, you know that it can be a frustrating experience. That’s because the screwdriver isn’t actually inserted all the way into the ignition – instead, it’s just hammered in a little bit so that the point is touching the coil.
This simple technique is known as “point-contact starting” and it’s used to turn the engine over without having to use the key. While it works fine most of the time, there are times when it doesn’t work at all and you have to resort to using the key.
What happens if you try to use point-contact starting on a car with an electronic ignition? In theory, nothing bad should happen. However, in practice there are some risks involved that you should be aware of if you plan on trying this technique yourself.
What is Hammering a screwdriver into the ignition?
Hammering a screwdriver into the ignition may start a car, but it’s not recommended. This method is not recommended because it can damage the engine.
The Danger of Hammering a Screwdriver Into the Ignition
If you’re thinking of trying to start your car with a screwdriver, stop right away! It’s one of the most common car-starting methods, but it’s also one of the most dangerous.
When you try to start a car with a screwdriver, you’re putting yourself and everyone else in danger. You could accidentally turn the screws too far, resulting in an explosion and serious injury.
Plus, if your screwdriver slips and hits the ignition, you could cause a major fire. Don’t risk it—leave the screwdriver out of the equation when trying to start your car.
Why Hammering a screwdriver into the Ignition Can Be Dangerous
Hhammering a screwdriver into the ignition can be dangerous because it could cause the car to start. If the screwdriver is placed correctly, it should hit the spark plug wire. However, if the screwdriver is not placed correctly, it could hit other wires in the engine or even the fuel lines. This could create a serious fire that could kill someone inside the car.
How to Prevent Hammering a Screwdriver Into the Ignition
If you’re like most people, you probably hammer a screwdriver into the ignition of your car from time to time in an attempt to start it. But is this really the best way to try and get your car going? The short answer is no, it’s not.
Hammering a screwdriver into the ignition can create a spark that may start your car, but it’s also likely to damage the vehicle’s engine. In addition, if you’re not careful, you could also hit something else in your car with the screwdriver and cause serious damage.
Instead of hammering a screwdriver into the ignition, try using a key chain tool or battery-operated starter. These are much less likely to cause damage and they’re also easier to use if you need to get your car started in a hurry.
Conclusion
There is some debate as to whether or not hammering a screwdriver into the ignition of a car will start it. However, as long as you’re using a screwdriver that fits the engine’s spark plug hole, most experts believe that it is safe to do so. So if you’re having trouble starting your car and think slamming a screwdriver into the spark plug might help, give it a try!