Waxing a car can be a tedious and time-consuming process, but one that is often necessary to keep your vehicle looking its best. But what if you could use water to bead on wax instead? In this article, we’ll explain why this is the case, and show you how to do it yourself!
What Causes Water to Bead on Waxed Car?
There could be a few reasons why water beads on waxed car. One possibility is that the wax was not applied evenly. If parts of the car are wetter than others, those areas will bead up more water. This can happen if the wax is too thick or if it was not applied in a smooth, even layer. Another possibility is that the car’s surface is not coated in wax at all. This can happen if the car was just wet when it was Waxed, or if the wax did not penetrate properly into the surface. If this is the case, then any moisture that gets on the car will bead up and cause water to form droplets.
How to Prevent Water from Beading on Waxed Car
Water can bead up on the wax of a car, causing it to become difficult to clean. Here are some tips to keep your car clean and waxed:
1. Make sure the car is clean before waxing. Remove all the dirt, dust, and debris with a cloth or vacuum cleaner.
2. Apply a light coat of wax to the car. Be sure to apply only enough wax to cover the surface and avoid getting it on any trim or plastic parts.
3. Wait about 30 minutes for the wax to dry completely before cleaning the car. Use a microfiber towel or a non-abrasive soap like Dawn dishwashing liquid to wipe down the car. Do not use harsh chemicals or scrubbing pads as they can damage the paintwork.
4. Waxed cars should be cleaned regularly, usually once a month or every six months, depending on how often they are used. If you notice water beading on your car, give it a good cleaning right away and skip the waxing step for that day.
What to Do If Water Has Already Beaded on Waxed Car
If water has already beaded on your car’s wax, there are a few things you can do to try and remove the water. You can try using a vacuum cleaner with a hose attachment, or you can use a bucket and sponges. If these methods don’t work, you may have to go through the process of car washing again.