If your Can-Am Outlander is experiencing power steering problems, it’s important to check the fuse location. This guide will walk you through the steps of checking and replacing the power steering fuse.
What is the Can-Am Outlander Power Steering Fuse Location?
If your Outlander’s power steering stops working, you may need to replace the fuse. You can find the fuse located in the dash near the steering wheel.
How to replace the power steering fuse on an Outlander?
Replacing the power steering fuse on an Outlander is a pretty simple task. If you have an automatic transmission, you’ll need to access the fuse box under the hood. If you have a manual transmission, you’ll need to remove the front bumper and remove the fascia panel.
Once you’ve located the fuse box, look for the power steering fuse hidden behind a plastic cover. Remove the cover and flip over the fuse to find its location. Replace the fuse with a new one and replace the cover.
When should you replace the power steering fuse in an Outlander?
When should you replace the power steering fuse in an Outlander? Replacing the power steering fuse is a common repair on all types of vehicles. Car manufacturers typically recommend that the power steering fuse be replaced every 6 months or 12,000 miles, whichever comes first. However, depending on your driving style and how you use your Outlander, this time interval may need to be shorter or longer.
If you have to frequently use the brakes or steer quickly in a tight spot, your Outlander may require closer attention to the power steering fuse. In these cases, it’s best to replace the fuse sooner rather than later in order to keep your vehicle running smoothly.
If you don’t abuse your Outlander and drive it more like a car than a trail rig, then replacing the power steering fuse every 6 months should be suffice.
What are the risks of not replacing the power steering fuse in an Outlander?
A blown power steering fuse will cause your Outlander to lose power steering, making it difficult to drive. Replacing the power steering fuse can help to prevent this from happening, and ensures that your Outlander is performing at its best.
How to install a new power steering fuse in an Outlander?
If your Outlander is feeling a bit sluggish or boggy in the corners, it might be time to replace the power steering fuse. The fuse is located in the engine compartment and requires some basic tools (a torx bit, a flat head screwdriver, and a wrench) to remove. Here’s how to do it:
1. Park your Outlander on a level surface and turn off the ignition.
2. Disconnect the negative battery cable.
3. Locate the power steering fuse box on the driver’s side of the engine bay, below the air cleaner assembly.
4. Using a torx bit, remove the screws that fasten the box to the engine bay framework.
5. Pry open the box and remove the power steering fuse (which is usually a round, squat cylinder).
6. replace the power steering fuse with a new one and reattach the screws.