If you have a 1998-2002 Jeep Cherokee then you may have power steering fluid leaking from the joint between the steering shaft and power steering pump. Power steering fluid is a vital part of the power steering system and if it leaks, it can cause serious problems with the vehicle. In this article, we will take a look at how to replace the power steering fluid in a 1998-2002 Jeep Cherokee.
What is Transmission Fluid
Transmission fluid is a lubricant and anti-wear agent used in the transmission of power from the engine to the wheels.
When it comes to your car’s transmission, using the correct fluid is essential for protecting it and ensuring smooth gear changes. Transmission fluid is made up of three main components: oil, synthetic ATF (automatic transmission fluid) or MTBE (maltech transmission fluid), and friction reducer. The main function of transmission fluid is to reduce friction between the engine and transmission, which helps to optimize gear shifts and ensure a smooth drive. Transmissions can also become noisy over time if they are not properly lubricated, so it’s important to use the right type of fluid for your car.
If you’re ever having trouble with your car’s transmission, be sure to first check to see if your car requires any type of special lubricant or fluid. If you’re not sure, don’t hesitate to call your local Chevrolet dealership for assistance. Transmission fluid is a delicate substance, so using the wrong kind can cause serious damage to your car.
How to Put Transmission Fluid in Power Steering
If you’re having trouble with your car’s power steering, there’s a good chance that you need to put transmission fluid in it. Here’s how to do it:
1. Park your car in a safe place.
2. Turn off the engine and remove the key from the ignition.
3. Locate the power steering fluid reservoir under the car, on the driver’s side. Pour out half of the fluid.
4. Open the power steering reservoir cap and add half of the new transmission fluid to it. Replace the cap and turn on the engine. Check for leaks. If there are none, turn off the engine and store the reservoir upright.
5. Repeat Step 3 until you have replaced all of the power steering fluid.
What to Do If Transmission Fluid Won’t Drain
If your transmission won’t drain, you may need to add transmission fluid. Follow these steps to add transmission fluid:
1) Park the car in a secure location so it will not move.
2) Open the hood and secure it open with a strap.
3) Place a container under the car so the transmission fluid will drain.
4) Remove the cap on the transmission reservoir.
5) Pour enough transmission fluid into the container to cover the bottom of the reservoir.
6) Replace the cap on the reservoir and tighten it using a wrench.
7) Drive the car until all of the transmission fluid has been drained.
Conclusion
Yes, you can put transmission fluid in power steering. However, it’s important to do so cautiously and under the guidance of a qualified mechanic. Transmission fluid is a very corrosive substance that can damage power steering components if not used properly. Therefore, be sure to consult with your mechanic before using transmission fluid in power steering to avoid any potential harm or problems down the road.