Have you ever had to change your power steering fluid, and found yourself baffled by all the different types and sizes of Hahn’s and Prestone? Do you have a container of each type ready to go, or do you have to visit a mechanic? In this article, we’re going to discuss how to change your power steering fluid using basic supplies you likely already have in your garage. We’ll also show you how to identify the type of power steering fluid your vehicle uses, and give you tips on choosing the right product.
What is Power Steering Fluid
Power steering fluid is a type of motor oil that helps to turn the wheels of a car. It is usually found in a tank under the car, and it helps to keep the car moving in the correct direction. Power steering fluid can often become dirty, and it is important to change it regularly if the car is used regularly.
How to Change Power Steering Fluid
If you have a power steering issue, it’s time to change the fluid. Power steering is an important system on your car, and it should be serviced regularly to keep it functioning at its best. Here are the steps to changing your power steering fluid:
1. Park your car in a safe location.
2. Remove the cap on the power steering reservoir.
3. Use a funnel to fill the reservoir with power steering fluid.
4. Replace the capped reservoir and verify that the level is correct by referencing the dipstick or level indicator on the side of the tank.
5. Drive your car for at least 20 miles (32 kilometers) to distribute the fluid evenly throughout the system.
6. Stop at a service station and have the fluid replaced with new fluid according to your vehicle’s manufacturer’s instructions.
What to do if Power Steering Fluid is Not Working Properly
If you’re experiencing power steering problems, there are a few things you can do to try and fix the issue. You can check the fluid level, replace the power steering pump, or adjust the gears.
Check the Fluid Level
The first step is to check the fluid level. If it’s low, you’ll need to add more fluid. You can do this by either using a syringe or a bottle. Make sure to add enough fluid so that the steering wheel turns easily.
Replace the Power Steering Pump
If the fluid level isn’t correct, you may need to replace the power steering pump. To do this, you’ll need to unscrew the bolts that hold it in place and remove it. Be sure to keep track of which bolt goes where so you can reinstall it correctly later on. Once the pump is replaced, reattach the bolts and screws and ensure that they’re secure.
Adjust Gears
If you don’t see any signs of leakage or damage, your next step is to adjust the gears. This will help to remedy any slipping or jerking of the vehicle’s movement due to poor power steering. To do this, turn the gear selector lever towards “3” and
Conclusion
Power steering fluid can often be a difficult item to change, and is one that you may find yourself having to take your car in for repair more than once. The good news is that there are a few things you can do to make the process easier on yourself, and we have outlined those below. First of all, always ensure that the reservoir is full before taking your car in for service — this will help reduce the chances of having to refill it during repairs. Second, keep an inventory of power steering fluid bottles so that you know which bottle goes where. Finally, if possible, try to change power steering fluid while your car is still running so that you minimise the chances of damage being caused. Thanks for reading!