Jacking up a car on radiator support can be a tricky task, but with the right tools and instructions, it can be done easily and safely. In this article, we’ll outline the steps you need to take to jack up a car safely, as well as the tools you’ll need to complete the job.
What is Radiator Support?
Radiator support is a type of car lift that is designed to safely and easily jack up a car without having to remove the engine or transmission. Radiator support also comes in handy when you need to access the beneath-the-car part, like the cooling system.
Most radiator support lifts are equipped with hydraulic jacks and hydraulic cylinders, which makes them very versatile and easy to use. You can use them to jacked up cars quickly and easily without damaging anything.
How to Jack Up a Car on Radiator Support
If you’re looking to jack up a car on radiator support, there are a few things you’ll need to know.
First, make sure the car is securely attached to the radiator support. You don’t want it moving around while you’re working, or it could cause damage.
Second, find the engine mount bolt that attaches the engine to the radiator support. It’ll likely be a Phillips head screw with a washer and nut on each end. Loosen the nut on one end of the bolt and use a wrench to turn it counterclockwise until it’s tight against the mounting bracket on the car. Then snug up the nut on the other end of the bolt.
Third, mark where the bolt sits in relation to the ground. Use a level to make sure everything’s level before proceeding. Next, use a wrench to loosen the mounting bracket nut on one side of the bolt and place your jack under that side of the bracket. Hold onto both sides of the bracket with your hands and jack up the car until it’s off of the ground (be careful not to hit anything!).
Finally, remove both bolts from the engine mount and replace them with new ones. Tighten both nuts
What to Do If Your Car Falls Off Radiator Support
If your car falls off of radiator support, you’ll need to act quickly to avoid getting into serious trouble. Here are some tips on what to do if your car falls off of radiator support:
1. Drive to a safe location and stop the car.
2. Remove all passengers from the car and wait outside for help.
3. If you can, turn off the engine and open all hoods.
4. Check to see if anyone is trapped inside the car and call for assistance if necessary.
5. Disconnect all electrical connectors and remove any objects that may be blocking the doors from opening.
6. Use a hydraulic jack to raise the car as high as possible, then remove the jack and let it fall back down to the ground.
7. Call for help and wait for emergency responders to arrive.
Conclusion
Yes, you can jack up a car on radiator support. Doing this is not recommended and should only be done as a last resort if all else fails. If your car has been damaged in an accident or if the radiator support has been compromised, it’s important to get expert help before trying to remove the rad – otherwise you could end up causing more damage than good.