If your car’s power steering seems a little slow or clunky, chances are you may need to replace its fluid. In this article, we’ll show you how to replace the power steering fluid in a car with Atf fluid and explain why it’s necessary.
What is ATF fluid?
ATF fluid is a type of lubricant that is used in many different types of machines, including power steering. Power steering systems use ATF fluid to help turn the wheels and provide feedback to the driver.
How to replace ATF fluid in a power steering system
If your power steering system is exhibiting symptoms such as poor steering, deterioration of the system components, or reduced power then it may be time to replace the ATF fluid. This article will outline the steps necessary for replacing the fluid in a power steering system.
Before starting any work on the vehicle, be sure to have the correct tools and supplies ready. Required tools include a pressure gauge, wrench, and replacement fluid. Some materials that may be needed to complete the repair include brake fluid, sealant, and new power steering hoses.
1. Park your car on level ground and turn off all engine accessories.
2. Remove the wheel and tire.
3. Disconnect both fuel lines from the engine and remove the battery cover.
4. Remove four screws holding the power steering reservoir cover in place and remove cover.
5. Locate and remove the ATF filter (or use a vacuum cleaner to clean out the system).
6. Fill a container with fresh ATF fluid (at least 3 quarts) and add water until mixture reaches 100-degrees F (38-degrees C).
7. Replace filter and replace power steering reservoir cover using screws removed in step 4.
8. Reconnect
When to replace ATF fluid in a power steering system
If you are experiencing any of the following symptoms, it is time to replace your power steering fluid:
-Your steering feels clunky or stiff
-You notice a decrease in power
-Your engine warning light comes on
The best time to replace power steering fluid is when you experience any of the above symptoms.
Conclusion
Power steering fluid is a crucial part of keeping your car in good shape. If you’re wondering if you can put ATF fluid in power steering, the answer is yes, but it’s important to consult with a mechanic first to make sure the fluid is compatible and safe for use. Additionally, power steering fluid should only be changed when the manufacturer recommends doing so.