Transmission fluid is a type of lubricant that helps the gears inside your transmission slip smoothly and without noise. Checking and topping off your transmission fluid is important to keeping your car running well, so don’t forget to do it!
What is Power Steering Fluid?
Power steering fluid (PSF) is a hydraulic fluid used in vehicles to assist the driver in turning the wheel. It is a blend of ethylenediaminetetraacetic acid (EDTA) and water, with a specific gravity of 1.28 to 1.33.
Most power steering systems use an oil-based PSF but there are also systems that use a water-based PSF. In either case, the PSF fluid circulates through the system between the gearbox and the steering wheel, assisting in the turning of the wheel.
Can you Put Power Steering Fluid in your Transmission
Most power steering systems use an oil-based PSF but there are also systems that use a water-based PSF. In either case, the PSF fluid circulates through the system between the gearbox and the steering wheel, assisting in the turning of the wheel. To change your power steering fluid:
1. Park your vehicle on a level surface.
2. Remove the caps from both ends of your gearbox.
3. Remove the cap on top of your transmission Tunnel Fill plug (or fill plug if using a water-based PSF).
How do I Put Power Steering Fluid in my Transmission?
When your car has power steering, the fluid helps to move the pump and rack to create a force that helps guide the car. When your car is lacking power steering, the fluid may not be able to keep up with the demand and will become thick and difficult to move. This can cause issues with your car’s performance, such as poor acceleration or unpredictable movements.
To put power steering fluid in your car, you’ll need a container of the appropriate size and a funnel. Start by filling your container about two-thirds of the way with power steering fluid. Pour the remainder of the fluid into the funnel and squirt it into your transmission. Be sure to avoid getting any on yourself or your vehicle.
What if I Overfill My Transmission with Power Steering Fluid?
If you overfill your transmission with power steering fluid, it could result in a loss of power and possible transmission failure. If you are unsure whether or not you have filled your transmission to the correct level, refer to the owner’s manual. Overfilling your transmission with power steering fluid will also increase the risk of hydrocarbons accumulating in the engine oil, which can cause engine failure.
Can you Put Power Steering Fluid in your Transmission
Power steering fluid is a vital component of your transmission, and it should never be substituted with anything else. If you’re ever in doubt about whether or not to add power steering fluid to your transmission, consult your car’s owner’s manual or take your car into a mechanic for a diagnosis.
Conclusion
Yes, you can put power steering fluid in your transmission. This is a common repair that people make due to a variety of causes, but the most common reason is when the power steering hose leaks. By adding power steering fluid, you are essentially creating a seal between the engine and the transmission, which helps to prevent fluid from leaking out.