Brake line flush is an important maintenance task for your car. By flushing the brake lines, you keep your brakes working properly and safe. However, there are some questions that you might have about this routine maintenance task. In this article, we will answer some of the most common questions about brake line flush.
What is a Brake Line Flush?
A brake line flush is a routine maintenance procedure that should be performed on all vehicles with hydraulic brakes. The purpose of a brake line flush is to clean and lubricate the brake lines. Brake line flushes are typically done at least once a year, but can be done more often depending on the driving conditions.
When Should I Flush My Brake Line?
If you’re driving a vehicle with brake lines, it’s important to flush them regularly. This prevents dirt and grit from building up in the line, which can eventually cause brake failure. Here are four guidelines for when you should flush your brake lines:
If your car has less than 10,000 miles on it: Every 6,000 miles or every three months.
If your car has 10,000-20,000 miles on it: Every 12,000 miles or every six months.
If your car has more than 20,000 miles on it: Every 18,000 miles or every twelve months.
If your vehicle is 10 years old or newer: You don’t need to flush the lines at all!
How Often Do I Need to Flush My Brake Line?
If you drive a vehicle with an automatic transmission, it’s important to know how often you should flush your brake line. Brake line flushing keeps your braking system clean and functioning correctly. Here’s how often you should flush your brake line:
-Every 5 years if your vehicle has less than 80,000 miles on it.
-Every 3 years if your vehicle has 80,000 or more miles on it.
Conclusion
It’s important to flush your brake line on a regular basis in order to prevent any possible brake problems. A brake line flush is a simple procedure that can help you keep your car running smoothly and avoid costly repairs. Follow these steps to flush your brake lines:
1) Park the car in a safe location
2) Turn off all the lights inside the car
3) Disconnect both ends of the brake line from the caliper
4) Remove the wheel and tire from the car
5) Pour clean water into each caliper basin (until it reaches bottom of basin), making sure not to spill any water onto the ground or floorboard
6) Replace wheel and tire, reconnecting brake line at appropriate intervals