A lot of people don’t realize that their car’s power steering fluid needs to be flushed every 7,500 miles. This is because the power steering fluid helps to keep the car’s steering system working properly. However, if the fluid isn’t flushed, it can cause problems with the car’s steering system.
What is Power Steering Fluid?
Power steering fluid is a type of fluid that helps the driver steer the car. It helps to increase the power and accuracy of the steering. In most cases, power steering fluid needs to be flushed every 3 to 6 months. However, there are some exceptions to this rule. If your car has been in an accident, or if it has been sitting for a long period of time without being used, power steering fluid may need to be flushed more often.
How Does the Power Steering System Work?
The power steering system is responsible for guiding the car and its driver through turns. This system uses fluid to help move the car and create a sense of direction. The fluid is designed to resist erosion and contamination, so it needs to be flushed periodically. Here are some tips on how to flush the power steering system:
1. Remove the car’s hood.
2. Locate the power steering reservoir (or “reservoir”).
3. Use a funnel to fill the reservoir with fluid until it reaches the “max fill” line (or until there is low or no warning light).
4. Close the hood, turn the key to ” OFF “, and wait 10 minutes before starting the car.
5. Drive around for a few minutes to make sure everything is working properly.
Should Power Steering Fluid Be Flushed?
Yes, power steering fluid should be flushed every 30,000 miles or when the steering feels boggy or the fluid is no longer clear.
Why Is Power Steering Fluid Needed?
Power steering fluid is a type of fluid used in a car’s power steering system. The power steering system is responsible for handling the car’s turning radius and helping to keep the driver comfortable while driving.
A power steering pump, which uses power from the engines to move the fluid, helps to provide the smooth and accurate movement required for driving. A power steering fluid leak can cause decreased performance and even a failure of the system.
When your car was manufactured, the power steering system was flushed with fresh fluid. However, sometimes drivers forget to do this over time, or they experience a leak that requires servicing. In either case, it’s important to flush your power steering fluid system as soon as possible in order to restore optimal performance.
What to Do If The Power Steering Fluid Isn’t Flushing Properly
If you’ve been having trouble steering your car, it might be time to flush the power steering fluid. Flushing the system helps remove dirt, debris, and other contaminants that can cause problems with the system.
Toflush the power steering system:
1. Park your car in a level spot.
2. Turn off the car and remove the negative battery cable.
3. Disconnect the fuel and air lines from the fuel injection pump.
4. Remove the power steering hose from the pump.
5. Open the hood and remove the power steering reservoir. Pour about two quarts of fluid into the reservoir and close the hood.
6. Reconnect all of the lines, then reattach the negative battery cable. Reconnect the fuel line, then turn on the car and start it up. Drive until you’ve driven about 10 miles (16 km) to allow for full flushing of fluid through system
Conclusion
In general, it is recommended that power steering fluid be flushed every 3 to 6 months. However, since different vehicles may require different amounts of fluid, always consult your owner’s manual or a qualified mechanic for the most up-to-date advice on when and how to flush your power steering system.