If you’re like most people, you probably don’t think of power steering fluid (PSF) as anything more than something that’s necessary for keeping your car in good working order. But PSF is actually a complex mixture of various fluids, and if it’s not replaced correctly it can damage your car’s engine. In this article, we’ll show you how to replace PSF in a car.
What is Power Steering Fluid?
Power steering fluid is a type of oil that is used in cars to help the driver control the car. Power steering fluid helps the driver steer the car by providing feedback to the driver’s hands about how much force they are using to turn the wheel.
How to Put Power Steering Fluid in a Car
When it comes to keeping your car running smoothly, a power steering fluid refill is a must. Here’s how to do it:
1. Open the hood and locate the power steering reservoir. It will most likely be near the front of the car on the driver’s side.
2. Park your car in a safe location with the engine off, and then turn off the ignition.
3. Remove the cap from the power steering reservoir, and then remove any debris that may be lodged inside of it.
4. Fill the reservoir to the recommended level with cool, fresh power steering fluid.
5. Replace the cap and tighten it securely with a wrench. Make sure you write down the manufacturer’s part number so you can order more fluid should you need to in the future!
What to Do If You Can’t Find Power Steering Fluid
If you’re having trouble finding power steering fluid, don’t panic. There are a few things you can do to try and fix the issue.
One option is to try flushing the system with fresh fluid. Make sure to use the correct type of fluid and fill up the reservoir as directed by your car’s owner’s manual.
If this doesn’t work, you can try using a pressure pump to force the fluid out. Drive your car for about 10 minutes while applying pressure with a pump to the reservoir.
If neither of these solutions work, your car may need a new power steering pump.
Conclusion
Putting power steering fluid in a car can be a hassle, but it’s definitely not impossible. In this article, we’re going to show you how to do it easily and without any fuss. First, take the cap off of the power steering reservoir. Next, unscrew the top of the reservoir by turning it counter-clockwise until it comes loose from the pump. Once the reservoir is unscrewed, pour in enough fluid to cover the bottom of the pump spindle (you should use about 2 cups). Replace the top of the reservoir and screw it back on tight. That’s it!