If you own a 2011 Prius and have been noticing that the car has been skidding on wet roads, it might be time to flush your brakes! Flushing the brakes on a Prius will remove any built up moisture that may be causing the skidding. If you have recently replaced your brake pads or discs, flushing your brakes may also be necessary in order to clean and lubricate the braking system. Keep in mind that this procedure should only be done by a professional mechanic.
What are Flush Brakes?
Flush brakes are a type of braking system that uses the engine to slow the car.
In a normal brake system, the brake pedal is pressed down by the driver. This causes the car’s brake pads to come in contact with the rotors on the discs. This friction slows down the car.
Flush brakes work differently. The engine is still used to slow the car, but instead of using the brake pedal, the driver presses a button that sends fluid into the braking system. This fluid helps to keep the pads from making contact with the rotors. This system is more efficient because it uses less energy than a regular brake system.
Flush brakes are usually found on luxury cars because they offer a more luxurious feeling than a standard brake system. They are also more efficient and use less energy, which is good for the environment.
How to Use Flush Brakes
1. To use flush brakes on a Prius, first make sure the car is in park.
2. Press and hold the brake pedal down until the car comes to a complete stop.
3. Keep your hand on the brake pedal while you slowly release it.
4. The car should now be in flush braking mode. To exit flush braking mode, simply press the pedal again and drive away.
What to Do If Your Flush Brakes Fail
If your flush brakes on your Prius fail, you’ll need to do the following:
1. Turn off the car and remove the key from the ignition.
2. Place a mat or rug under the car in case it falls.
3. Raise the car with a hydraulic jack. DO NOT attempt to fix the flush brakes without first raising the car.
4. If there is water accumulating beneath the brake pads, it may be necessary to replace them. Check with your dealer for more information.
Conclusion
I hope you have enjoyed this article on how to flush your brakes on a 2011 Prius. This is an important procedure that every driver should know and perform on a regular basis. By flushing your brakes, you will ensure they are in the best possible condition so that you can stop quickly and safely when necessary. If you have any questions or would like to discuss this topic further, please feel free to leave a comment below or contact us directly. We would be happy to help!