When a brake fail is imminent, the first thing you want to do is stop the car. Unfortunately, if it’s too late and there’s already damage done, your only hope is to flush and bleed the brakes as quickly as possible. In this guide, we’re going to show you how to do a brake flush on a BMW using Miuch.
What is a brake flush?
A brake flush is a simple maintenance procedure that can help to keep your BMW safe and functioning smoothly.
Brake flushes are typically performed every 6,000 miles or every three years, whichever comes first. They involve washing the braking system with a high-pressure water jet and degreasing the pads. This helps to remove any build-up of dust, dirt, and grease that can cause vibration and disc problems.
How to do a brake flush on a BMW
If you’re wondering how to do a brake flush on a BMW, there are several steps involved. Here’s a guide to help you out:
1. Start by removing the dust cover on the brake rotor.
2. Use a vacuum cleaner to clean the brake pads and discs.
3. Add brake fluid (just enough to cover the pads) and fill the reservoir with fresh fluid. Replace the dust cover and tighten the screws.
Pros and Cons of a brake flush
When it comes to brakes, some people prefer the traditional method of applying pressure with your hands. Others may prefer the newer approach of using a brake flush.
There are pros and cons to both methods, but overall, a brake flush is typically considered more reliable. This is because it eliminates the chance of dust and other debris getting into the brake pads and causing a problem.
Another benefit of a brake flush is that it can help to restore the brakes’ lifespan. Over time, brake pads can lose their ability to stop effectively. A brake flush can help to restore their performance to near-new levels.
However, there are also drawbacks to using a brake flush. For one, it can be expensive. And, if you don’t do it correctly, it could result in damage to your car’s braking system. So, before you consider requesting a brake flush on your BMW, be sure to consult with your mechanic first.
Conclusion
If you’re wondering how much a brake flush on your 2017 BMW costs, it’ll set you back around $229. This service is recommended every 60,000 miles or every 6 years, whichever comes first. Brakes can become contaminated with dust and other materials over time, which can lead to decreased braking performance and potential safety concerns. A brake flush will clean all of the brake parts inside and out, as well as the fluid levels in each system. If you need to schedule a brake flush for your BMW, be sure to call our team at Franks BMW today!