One of the most common questions people have about their car is “How much power steering does my car have?” If you’re not sure, or just want to make sure your car has the power steering you need, here’s a look at how it works and how you can adjust it.
What is Power Steering Flush?
Power steering flush is a procedure that is typically done on luxury vehicles to keep the fluid in the system clean and free of debris. The flush is performed by injecting a cleaning solution into the power steering system while the vehicle is running.
How to Check for Power Steering Flush
Power steering systems have been made to work better and last longer by flushing the fluid regularly. Here is how you can check for power steering flush:
1) Park the car in a level place.
2) Turn the ignition off and remove the key.
3) Open the hood.
4) Locate the power steering lines near the front of the car.
5) Reach down and feel around near where the power steering lines connect to the axle assemblies. You should feel a valve stem if there is a power steering flush. If there is not a valve stem, then there may be a lack of fluid in the system and it needs to be flushed.
6) Reconnect the lines (or replace them if they were disconnected during inspection). Close the hood and turn on the ignition.
7) Drive the car around for a few minutes to make sure everything functions as it should.
How to Fix a Power Steering Flush
If your car is having trouble turning, it might be due to a power steering flush. This is a fairly common issue and can be fixed by following these steps.
The first step is to determine the source of the problem. Inspect the power steering system for any obvious signs of damage. If there are none, inspect the fluid level and pressure. If everything looks normal, it’s likely that the problem is in the pump or hoses.
If the pump or hoses are not the source of the problem, then the next step is to check for clogs in the lines. Check each line individually and if they all check out okay, then you likely have a clog somewhere else in the system. In this case, it might be necessary to take apart some parts of the steering system to fix the clog.
If all else fails, then it’s time for a power steering flush. This process removes debris and oil from the system, which should help solve the problem. Follow these steps to get started:
1) Remove any obstructions from in front of and behind the power steering pump
2) Open and bleed all of the air out of system
3) Position power steering pump on top
Conclusion
If you’re looking to upgrade your power steering system, you’ll want to ensure that the flush that you choose is compatible with your vehicle. Our selection of power steering flushes includes both OEM and aftermarket options, so you can be sure to find the perfect one for your car or truck. When shopping for a power steering flush, it’s important to consider both the type of flush and the model of your vehicle.