If your car has a manual transmission, it’s important to get your brake fluid flushed every 6 months or 12,000 miles. If your car has an automatic transmission, you should get it flushed every 3 months or 60000 miles. The reason for this is that over time brake fluid can accumulate dirt and other debris which can lead to the car stopping suddenly.
What is Brake Fluid Flush?
Brake fluid flush is a maintenance procedure that should be done every 3,000 miles or every three years, whichever comes first. Brake fluid is used to cool and lubricate the brake system. Over time, brake dust and other debris can accumulate on the friction surfaces of the brake pads and discs. This can cause decreased braking performance and even failure of the brake system.
The most effective way to clean and maintain your brakes is by flushing the system with new brake fluid every 3,000 miles or every three years. A quality brake fluid flush will remove all the old brake dust, varnish, and oil residues that can cause wear and flaw in your braking system.
How Often Should I Do a Brake Fluid Flush?
When it comes time to get your brake fluid flushed, it’s important to follow a schedule so you don’t overdo it and damage your car. Most mechanics recommend flushing your brakes every 3 to 6 months, but this depends on how often you use your car. If you drive less than 10,000 miles per year, you can go without a brake fluid flush for up to 12 months. If you drive more than 10,000 miles per year, you should flush your brakes every 3 to 6 months.
Pros and Cons of Brake Fluid Flushes
There are many pros and cons to having a brake fluid flush performed on a regular basis. On the pro side, flushing your brake system can help keep it in good condition and free from debris. On the con side, flushing can also be expensive and time-consuming, and it can be difficult to determine when a brake fluid flush is needed.
The best way to decide when a brake fluid flush is necessary is to monitor the condition of your brakes. If you notice any signs of wear or degradation, such as noise or poor performance, it’s probably time for a brake fluid flush. In addition, if you experience hydroplaning or other problems when braking in wet conditions, it may be necessary to have your brakes flushed.
Conclusion
When it comes time for your brake fluid flush, there are a few things you should keep in mind. First and foremost, always use factory recommended fluids — anything else can cause damage to your brakes. Second, make sure the fluid level is above the MIN line on your fluid reservoir — this will indicate that the fluid is at its safe minimum level. Finally, don’t forget toflush out any debris that has built up over time – this can include rust and other gunk. Follow these simple tips and you should be good to go!