Changing a car key ignition is a necessary but often mundane task that you don’t want to spend hours on. This guide will show you how to change a car key in just 10 minutes, using the least amount of force possible.
What is a Car Key?
A car key is a small, metal device that opens a car door and starts the engine. A key is usually made of metal, has a shape resembling a key ring, and is about 8 inches long.
How to Change A Car Key Ignition
If you have a car key with a pushbutton start, it’s time to change the ignition switch. This is a relatively easy task that can be done by anyone with basic tools and some knowledge of cars.
The first step is to remove the battery cable. This is located underneath the car near the wheel. Once the battery is disconnected, use a flathead screwdriver to pry off the cover at the bottom of the key fob. You’ll now need to unscrew and remove the six screws that secure the ignition switch. Be sure to keep all of these screws safe – you’ll need them later when you replace the switch.
Once the switch is free, it can be removed from the car. Be sure to wash your hands before touching anything electrical – there’s a good chance that any oils or grease on your hands will end up on the new switch. If you’re replacing an old switch, be sure to clean off all of the gunk and corrosion before installing it.
Now it’s time to install your new switch. Make sure that you have all of the screws from before – this will help ensure a tight fit. Replace the screws and reattach the cover using the 6 original screws. Test
Tools You Will Need
You will need the following tools in order to change a car key ignition:
-A key tool
-Phillips head screwdriver
-Lighter or Match
-New car key
-Old car key
Instructions
1. Locate the car key.
2. Identify the key’s associated cylinder.
3. Insert a new key into the cylinder.
4. Match the keyway of the old and new keys.
5. Turn the key to the “off” (or “lock”) position.
6. Push down on the door handle to push open the door.
7. Pry off the old key and insert the new one into the cylinder several times until it clicks in place.
Conclusion
Changing a car key ignition can seem like a daunting task, but it’s actually pretty simple. You’ll just need some supplies and the right instructions, and you’ll be able to have your car ready to go in no time at all. If you’re ever in doubt about how to do something like this, or if you just want to be sure that everything is working properly before taking your car into a professional mechanic for an adjustment, our guide should help. Happy changing!