It’s no secret that parents love to buy their kids new things. But with all the different car seats available on the market, it can be hard to know which one is best for your child. In this blog post, we will teach you how to change a graco car seat to a booster. This will give you more freedom to move your child around in their car and make driving much more comfortable for them.
What You’ll Need
What You’ll Need:
-A Graco car seat
-A booster seat
-A flathead screwdriver
-An Allen key
-Ratchet set or wrench
-Ladder or step stool
-Cordless drill with bits that fit a graco car seat belt anchor bolt (optional)
-1 inch hole saw (optional)
Step One: Remove the Graco car seat from the vehicle. Make sure to remove the safety straps first. Step Two: Unclip the shoulder belt from the harness and make sure it’s clear of the car seat. Step Three: Open up the car seat so that you can see where the anchor bolt is located on the back of it. Step Four: With a flathead screwdriver, unscrew the bolt until it comes out. Step Five: Place the newly purchased booster in the same position as your old one and reattach the shoulder belt. If you’re using a 1 inch hole saw, cut a hole in the back of your new booster large enough to fit your old anchor bolt. Note: The new booster must have at least twice as much cushioning as your old one in order to be compliant with current safety standards. Step Six: Replace the bolt and tighten it down with an Allen key. Be sure to test fit your new booster before replacing your Graco carseat in order to ensure that everything is working correctly.
How to Change Your Graco Car Seat
Changing a Graco car seat to a booster is an easy process. The following steps will help you do the change:
1. Remove the infant safety belt from the infant’s car seat.
2. If your Graco car seat has a removable base, remove the base. If your Graco car seat does not have a removable base, simply unfold it until it is flat on the ground.
3. Locate the shoulder strap adjusters located on each side of the car seat. Insert one end of the child restraint strap into each adjuster, ensuring that both ends of the restraint strap are evenly stretched across the width of the adjuster. Make sure that both ends of the child restraint strap are positioned so that they hang down below each side of the car seat.
4. Position your child in the car seat and attach their safety belt using either one or two buckles (depending on their age and weight). Be sure to check that their head and shoulders are properly seated in front of their hips and backrest; if not, readjust as necessary by pulling or pushing on either end of their safety belt until they are correctly positioned.
5. Place your Graco car seat onto its new base or remove any extra pieces if it has one, making sure to line up all edges and connectors properly before tightening screws or straps in designated spots
What to Do If Your Child is Too Big for the Graco Car Seat
If your child is too big for the Graco car seat, you can convert it to a booster seat. Be sure to read the instructions carefully before starting.
1. Locate the shoulder and lap belt slots on the back of the car seat. Attach the shoulder belt first, then tighten the lap belt.
2. If your child is taller than 4’9″, make sure that he or she sits in the middle of the seat with both legs hanging over the edge of each side. The head should be positioned just above where the shoulder and lap belts meet.
3. If your child is shorter than 4’9″, make sure that he or she sits close to one end of the seat with his or her legs hanging over the other end of side. The head should be positioned just below where the shoulder and lap belts meet.
4. Pull up on all four straps to tighten them securely against your child’s body
Tips for Storing Your New Booster Seat
If you have a new Graco car seat, and you’re thinking about using it as a booster seat, there are a few things to keep in mind.
The first thing to remember is that your Graco booster seat should fit properly in your car. Make sure the belt is tight enough so that it doesn’t move around, and make sure the height of the chair is high enough so that your child’s head reaches the top of the airbag.
Another thing to keep in mind is how often you’re going to need to use the booster seat. If you only plan on using it occasionally, it might not be necessary to buy a separate booster seat. But if you plan on using it more often, or if your child will be using a carseat for long trips, you’ll want to invest in a good booster seat.
Finally, make sure you clean your Graco booster seat regularly. This means removing any food or drink residue, and wiping down the fabric with a damp cloth.
Conclusion
If you’re planning on having a child in the future, it’s important to know about car seats and boosters. A car seat is designed to keep your infant safe during taxi rides, long trips, and even during sudden crashes. But as your child grows, their seat may not be equipped to handle their ever-changing body size. That’s where a booster seat comes in. By using a booster seat, you can help your little one reach their full height and weight potential while keeping them safe. If you’re wondering how to change a graco car seat to a booster, our guide will walk you through the process step by step. Thanks for reading!