Honda Civic 2008 power steering fluid needs to be changed every 7,500 miles or every 3 months, whichever comes first. Honda recommends using a quality power steering fluid because it will help to improve fuel economy, reduce emissions, and enhance the driving experience.
How to Change Power Steering Fluid Honda Civic 2008
If you are experiencing problems with your Honda Civic’s power steering, it is likely that the fluid has become contaminated. The best way to fix the issue is to change the power steering fluid. Here are instructions on how to do this:
1. Park the car in a level spot and turn off the engine.
2. Open the hood and remove the air cleaner assembly.
3. Remove the power steering reservoir cap and add fluid until it is level with the bottom of the reservoir (4 to 5 quarts). Replace the cap and tighten using a socket wrench.
4. Reinstall the air cleaner assembly, making sure that it is correctly seated on the hose clamp. Reconnect all hoses and connectors, replacing any that have been damaged in the process.
5. Close the hood and turn on the engine. Drive your car for a few minutes to allow it to reach operating temperature.
Tools and Materials required
To change the power steering fluid on a Honda Civic, you will need the following tools and materials:
-A wrench or a ratchet
-A funnel
-A quart of brake fluid
-A container to store the newly replaced fluid
To begin, remove the bolt that holds the power steering reservoir in place. Next, use the wrench or ratchet to loosen the bolt that holds the power steering pump in place. Finally, unscrew the power steering pump from the bracket and remove it.
Next, fill the power steering reservoir with brake fluid using the funnel. Pour enough fluid into the reservoir to cover the entire top of the pump. Replace the bolt and screw it into place. Next, replace the power steering pump and bracket, reversing these steps so that they are in reverse order. Plug in your Honda Civic and test your fluid level. If it is low, add more fluid to the reservoir until it reaches spec.
Safety Tips while Changing Power Steering Fluid Honda Civic 2008
It’s always important to be as safe as possible while changing power steering fluid. Here are a few safety tips that will help you change the fluid safely:
1. Wait until your car is completely cool before starting the work. This will help avoid any accidental fires.
2. Use a helper if possible. Having someone to help you move the car and hold the pieces while you work will make the job much easier.
3. Wear safety goggles and gloves if you are able. These will protect you from any fluid spills, and they also provide some protection against burns.
4. Use an approved power steering fluid. Make sure to use a product that is specifically designed for Honda Civics and other similar vehicles. This will ensure that the fluid is safe and effective.
5. Be careful when removing the old fluid cap. Be sure to lift it straight off of the reservoir, and do not twist or pull it out of place. This could break the seal and allow fluid to leak out of the system.
6. Disconnect all of the hoses before removing the old fluid reservoir. This will prevent any accidents during the process, and it will also make it easier to clean up afterward.