Waxing a car is one of those tasks that seems easy enough, but can quickly turn into a chore if done incorrectly. In this blog post, we will show you how to clay wax a car the right way, so that the process is both easy and error-free. We will also provide tips on what to do before, during, and after the waxing process so that your car looks its best. trust us—you won’t regret following our tips.
What You’ll Need
-Car wax
-Clay pellets
-Gel wax cleaner
-Cotton balls
-Car detailing cloths
-Microfiber towel
-Windshield washer fluid
– bucket
1. Begin by cleaning the car with a gel wax cleaner. Be sure to work up a good lather and rinse off the car with water. 2. Next, mix together two cups of clay pellets with one gallon of water in a large bucket. Soak the car for at least two hours, or overnight. 3. Once the car is clay coated, use a cotton ball to apply some detailing polish to any scratches or blemishes on the paintwork. Work quickly and carefully to avoid staining your hands or clothing with polish residue. 4. After polishing, dry the car using a microfiber towel. Apply windshield washer fluid to a clean spray bottle and mist it over the entire surface of the car. Let it sit for several minutes before wiping off any excess liquid with a clean towel or cloth. 5. Finally, enjoy your freshly clayed car!
How to Clay Wax A Car
If you’re looking to take your waxing skills up a notch, clay waxing is the perfect technique for you. This process uses heated wax and clay to remove all the imperfections on your car’s surface.
To get started, start by cleaning your car with a degreaser. Make sure to remove any grease or tar that may be present. Then,apply a thick layer of wax to the entire surface of the car. Next, heat up a small pot of clay until it’s hot but not smoking. Carefully pour the hot clay onto the waxed surface, spreading it out evenly with a spatula. Be careful not to burn yourself! Allow the Clay Waxing Process to work its magic for about 10 minutes, until all of the wax has been melted away and the surface is covered in white clay crystals. When finished, use a clean cloth or some warm water to clean off any residue from the Clay Waxing Process
Tips for Clay Waxing a Car
If you’re looking to give your car a clean, glossy finish, waxing is an excellent option. Here are four tips for clay waxing your car:
1. Prep Your Car
Before you wax your car, it’s important to first prep it. This means removing any excess dirt or dust from the surface, which will make the waxing process much easier. Use a vacuum cleaner or a duster to remove any loose particles.
2. Apply Wax Over The Surface
Now that your car is prepped, apply wax over the entire surface using a foam applicator or a cloth. Work the wax into every nook and cranny using circular motions. Let the wax dry completely before starting on the next step.
3. Polish With A Clay Pad And Towel
Once the wax has dried, use a clay pad to polish the surface until it’s shining. Once it’s polished to your liking, towel off the excess polish and let the car dry completely before applying another coat of wax.
4. Apply Another Coat Of Wax If Needed
How to Remove Wax Strips Safely
Wax removal can be tricky, but with the right techniques it can be safe and easy. Follow these steps to safely remove wax strips:
1. Pour a pot of hot water onto the wax strips and allow them to heat up.
2. Slip a cloth or paper towel beneath the wax strip and carefully pull off the strip.
3. Repeat this step until all of the wax is removed.
4. Pour a pot of cold water onto the wax strip to cool and harden it.
5. Use a credit card or scraper to remove the hardened wax from the surface.
Final Thoughts
Claying a car can be a daunting task, but with the right technique it can be easy and rewarding. Follow these simple steps to get the job done right:
1. Preheat the wax to 176 degrees F (80 degrees C).
2. Apply the wax using a fluffy cloth or applicator pad. Work in small circular motions to avoid over-waxing.
3. Allow the wax to cool for about 10 minutes before applying another coat.
4. Finish by buffing the surface with a clean, dry cloth or microfiber towel.
5. Repeat as necessary to achieve desired results