Over time, your power steering reservoir can become filled with dirt, debris, and other contaminants. If this happens, it can cause your power steering system to fail. In this article, we’ll show you how to clean your power steering reservoir so that you can avoid this problem.
What is Power Steering Fluid and Why do I Need to Change it?
Power steering fluid is a hydraulic fluid that helps to operate the power steering system in your vehicle. The power steering system uses hydraulic pressure to assist in turning the wheels, and the fluid helps to keep the system working properly. Over time, the fluid can become dirty or low, which can cause problems with the power steering system. For this reason, it is important to check and change the power steering fluid as needed.
How do I Know when To Change My Power Steering Fluid?
Your power steering fluid should be changed according to your car’s maintenance schedule. However, if you notice that your steering feels heavy or sluggish, or if you hear strange noises coming from your power steering system, then it’s a good idea to have your fluid checked and possibly changed.
What are the Symptoms of a Dirty Power Steering Reservoir?
If your power steering reservoir is dirty, you may notice that your vehicle’s steering feels heavier than usual. You may also notice strange noises coming from the power steering system, or leaks from the reservoir. If the reservoir is very dirty, it can cause the power steering pump to overheat and fail.
How do I Clean My Power Steering Reservoir?
If your power steering reservoir is dirty, it can cause problems with your car’s steering. To clean it, you’ll need to remove it from the car and disassemble it. Clean the inside of the reservoir with a degreaser and a brush. Rinse it out with water and dry it before putting it back together.
Do’s and Don’ts of Power Steering Reservoir Cleaning
One of the most important maintenance tasks for keeping your car running smoothly is to regularly clean the power steering reservoir. Over time, debris and dirt can build up in the reservoir, causing the system to become less effective. If left unchecked, this can eventually lead to complete failure of the power steering system.
Fortunately, cleaning the power steering reservoir is a relatively easy task that can be done at home with some basic tools. In this article, we’ll show you how to clean your power steering reservoir in just a few simple steps.
Before getting started, it’s important to note that there are a few things you should NOT do when cleaning your power steering reservoir:
-Don’t use any abrasive materials or solvents on the reservoir. Abrasive materials can damage the finish and solvents can dissolve seals and gaskets.
-Don’t use high-pressure air to blow out the reservoir. The high pressure can damage delicate components in the system.
With Those Precautions in Mind, Here’s how To Clean Your Power Steering Reservoir:
1. Park Your Car on a Level Surface and Turn off the Engine. Make Sure that the Power Steering Fluid is Cool Before Beginning This Project.
2. Remove the Fill Cap from the Power Steering Reservoir and Use a Funnel to Pour in fresh Power Steering Fluid. Fill the Reservoir Until it Reaches the “Full” Line On the Dipstick.
3. Replace the Fill Cap and Start the Engine. With the Engine Running, Turn the Steering Wheel From Side to Side a Few Times to circulate the Fluid.
4. Turn off the Engine and Allow it to Cool for a Few Minutes.
5. Remove the Fill Cap and Use a Turkey Baster or Similar Tool to suction Out as Much of the Old Fluid as Possible.
6. Replace the Fill Cap and Repeat Steps 2-5 until Fresh Fluid Comes out When you suction it out with the Turkey Baster.
7. Inspect all of the Hoses Leading to and from the Power Steering Reservoir for Cracks, Leaks, or Any Other Damage. If any Damage is Found, These Parts will Need to be Replaced Before Proceeding.
8. Once all of the Old Fluid has been flushed out and any Damaged Parts have been Replaced, refill The Power Steering Reservoir with Fresh Fluid and Reattach all of the Hoses and Components.
9. Start the Engine and Turn the Steering Wheel From Side to Side a Few Times to circulate the Fluid.
10. Check for Leaks Around the Reservoir and Fill Cap. If no Leaks are Found, the Power Steering Reservoir Cleaning is Complete.
Conclusion
Cleaning Your Power Steering Reservoir is a Simple and Easy Task that Anyone can do. You Don’t Need Any Special Skills or Knowledge to do it, and it only Takes a Few Minutes. Plus, it’s a Great Way to Keep Your Car Running Smoothly and Avoid Potential Problems Down the Road. so Next Time you’re in the Garage, Take a Few Minutes to clean out your power steering reservoir – you’ll be glad you did!