If you’ve ever had to take your van in for a service, you know that one of the most common issues is a power steering reservoir screen that needs to be replaced. Luckily, this is an easy fix, and you can do it yourself if you have the right tools. In this article, we’ll show you how to clean the power steering reservoir screen on a Dodge Caravan van, so that you can avoid having to take it in for service.
What is Power Steering Reservoir Screen Dodge Caravan?
The power steering reservoir screen is a component of the power steering system on Dodge Caravans. It is a screen that helps to prevent debris from entering the power steering system. When it becomes clogged, the screen can cause loss of pressure in the system, which can lead to decreased performance and even a failure. In order to keep the power steering reservoir screen clean, you will need to regularly clean it using a proper cleaning solution and method.
How to clean Power Steering Reservoir Screen Dodge Caravan
If you have a Dodge Caravan, one of the things that may need regular cleaning is the power steering reservoir screen. While it is not something that typically needs to be cleaned on a regular basis, if it becomes clogged or stained, it can affect the performance of your power steering system.
To clean the reservoir screen, first remove any obstructions from the intake and release the screen from the housing by pushing down on one end and pulling it towards you. Once free, scrub the screen clean with a stiff brush and water. Be sure to rinse and dry it off before placing it back in place.
If you notice any dirt or debris build up on your power steering reservoir screen, it is important to take action as soon as possible to prevent further damage. By following these simple steps, you can keep your reservoir screen clean and functioning properly.
Different types of screens and how to clean them
If you’re like most drivers, you probably don’t think much about your power steering reservoir screen. After all, it’s just a small piece of plastic that sits between your reservoir and the pump. But if your reservoir gets clogged up with debris, it can cause your car to struggle to turn.
There are a few different types of screens and how to clean them, so let’s take a look.
The first type is the inline screen. This is the most common type and is located right near the pump on the back of the reservoir. To clean it, you’ll need some compressed air and a small wire brush. First, use the compressed air to blow any dirt or dust out of the screen. Then use the brush to scrub away any buildup.
The second type is the cross-flow screen. This type of screen is usually found in larger reservoirs and is designed to prevent debris from entering into the pump. To clean it, you’ll need some compressed air and a wire brush. First, use the compressed air to blow any dirt or dust out of the screen. Then use the brush to scrub away any buildup.
The third type is the bypass screen. This type of
Tools you will need for the job
1. Power Steering Reservoir Screen Cleaner
2. Bucket
3. Soap
4. Cloth
5. Sponge
6. Glass cleaner
7. Scissors
8. Ruler or square
9. Toothbrush
10. Nail Polish Remover
11. Chemical Guys Duster and Vacuum
12. Carpet shampoo
13. Glasses or goggles to protect your eyes
14. Jumper cables
15. towel or rag to dry hands and face
16. Safety glasses or goggles
How to clean the reservoir screen
If you have a screen on your power steering reservoir, it’s time to clean it. This is especially important if the screen becomes clogged with sediment.
To clean the screen, pour a gallon of hot water into the reservoir and attach the garden hose. Turn on the water and let it run until it clears the screen. Use a powerful stream of water to clean the screen. Gently rinse and dry the screen with a cloth.