If you’re ever having trouble adjusting your car’s power steering, or if the box itself seems to be going bad, it might be time to convert it to manual. Though this DIY project can seem daunting at first, follow our easy guide and you’ll be on your way in no time!
What You Will Need
In order to convert a power steering box to manual, you will need the following:
– A power steering box
– A manual gearbox
– A torque wrench
– A socket set
– A ratchet and extension cord
– Jack
– Barracuda 5500 Power Steering Conversion Kit
The barracuda 5500 Power Steering Conversion Kit contains all of the necessary parts needed to convert a power steering box to manual. The kit comes with a power steering box, a manual gearbox, a torque wrench, a socket set, and a ratchet and extension cord. The kit also includes a jack and barracuda 5500 Power Steering Conversion instructions guide.
Tools Required
1. Power Steering Box Removal Tool
2. Manual Transmission Conversion Kit
3. 17mm Socket
4. Ratchet & Wrench
5. 5-Inch Flexible Extension
6. Torque Wrench
7. Floor jack
8. JIS Rods
9. New Power Steering Box
10. Lube
11. Jack Plates/Casters (if applicable)
12. Emergency Brake Cable (if applicable)
Power Steering Box Removal Tool: This is a must-have tool for manual transmission conversion! It is a small, hand-held device that uses a ratchet and wrench to remove the power steering box from the vehicle’s axle. It can be stored easily in your garage or toolbox and is very handy when working on older vehicles with difficult-to-access power steering boxes. Manual Transmission Conversion Kit: A manual transmission conversion kit will allow you to swap out the power steering box for a manual lever system without having to remove the entire axle assembly. This is often required when converting a car from automatic to manual transmission because the torque converter housing usually blocks the access to the power steering box on an automatic car. 17mm Socket: A
The Process
If you’re looking to convert your power steering box to manual, there are a few things you’ll need to do. First, you’ll need to find an existing power steering box that’s in good condition. Once you’ve found one, you’ll need to remove the entire assembly from your car. Next, you’ll need to purchase new brackets and links, as well as a new power steering pump. After all of this is assembled, you’ll simply reverse the process to convert your box back to automatic.
Results
If you’re looking to convert your power steering box to manual, there are a few things you’ll need to do. Read on for some tips and tricks on how to make the conversion a success!
1. Obviously, you’ll need to first swap out your old power steering box for a manual one. There are a few different options available on the market, so be sure to find the right one for your vehicle.
2. Next, you’ll need to install a manual shifter into your vehicle. This can be done with either an aftermarket kit or by modifying your existing shifter.
3. Finally, you’ll need to install new mounting brackets and linkage within the car. Make sure to follow all the necessary guidelines when doing this so that everything goes together correctly and without issue.