There are many ways to creativelyfit a Jack stand under your lowered car. In this article, we will show you how to use two different types of Jack stands, along with some helpful tips on how to fit them both.
What is a Jack Stand?
A jack stand, also known as a jack-stander, is a tool used to raise or lower a car or truck. It is made of metal or plastic and typically has two legs that extend outward from the base. By placing one end of the jack stand on the ground and the other end on the car’s suspension, the user can raise or lower the vehicle.
How to Fit a Jack Stand Under Lowered Car
If you have a lowered car and are having trouble fitting a jack stand under it, there are a few things you can do to make the fit easier.
First, check the width of your car’s track. Most cars have a track dimension of 12 inches. If your car is wider than this, you’ll need to get a jack stand that’s wider as well.
Second, measure from the center of the wheel well to the edge of your car’s track. This will give you the length of your jack stand.
Third, determine where on your jack stand you’ll want it to touch the ground. Mark this spot with a piece of chalk or a pen.
Fourth, put your jack stand in place and tighten its bolts until they’re snug. Make sure that the weight of the car is evenly distributed on both sides of the jack stand.
What to Do If the Jack Stand Falls Out
If your jack stands fall out as you lower your car, there are a few things you can do to stay safe.
1. Make sure the jack is fully loaded before lowering the car. This will help prevent it from tipping over.
2. Place newspapers or other soft, lightweight objects beneath the jackstands to help them stay in place.
3. Use a strap to secure the jackstands in place. This will help keep them from falling out while you work.
4. Use caution and take steps to avoid getting close to the car’s underside while it is lowered.