If your car’s ignition switch is not working properly, it can be a major inconvenience. In this article, we’ll show you how to fix the switch and get your car started again.
What is the ignition switch and what does it do?
The ignition switch is a basic car part that allows the engine to start. When you turn the key to the “on” position, the switch sends a signal to the car’s computer. This signal tells the computer which cylinder to start with. If your ignition switch isn’t working, you won’t be able to start your car.
How do you replace the ignition switch on a car?
If your car won’t start, or if you think the switch might be defective, it’s a good idea to replace the ignition switch. This is a relatively easy job for a mechanically inclined person, and can be done in just a few minutes. Here’s how to do it:
1. Remove the wheel and tire. This will give you easier access to the wiring around the ignition switch.
2. Disconnect the battery cable.
3. Remove the four screws that hold the cover on the switch housing.
4. Carefully remove the switch housing from the car.
5. Inspect the switch for damage or wear. If there is any, replace it as needed with new parts from your local hardware store.
6. Reinstall the switch housing and screws, reconnecting battery cable as necessary.
How to test if the ignition switch is defective?
Testing the ignition switch on a car is an easy and inexpensive way to determine if it is defective. All you need is a tester and some simple tools.
To test the ignition switch, first remove the key from the car. This will disable the security system and any anti-theft measures. Next, use a tester to try to start the engine. If the tester makes contact with the battery, then the switch is defective and needs to be replaced. If no contact is made, then the switch is working properly.
How to fix an ignition switch that is not working properly
If you are having difficulty starting your car, it is likely that your ignition switch is not working properly. This means that the spark needed to start the engine is not being generated when you try to turn the key in the ignition.
There are a few things you can do to troubleshoot and fix the issue, but in most cases it requires professional help. If you do not feel comfortable fixing the switch on your own, you may want to consider getting it replaced by a mechanic.
Here are some steps that may help you diagnose and fix the ignition switch on your car:
-Check for power at the ignition wire connector. This connector should be receiving constant power from the battery. If there is no power, check all of the other connectors and circuits around the key cylinder.
-Make sure all of the fuses are in place and correctly blown.
-Use a scan tool to check for bad logic boards or switches. Sometimes an ignition switch will just go out on its own, without any visible signs.
-Remove any obstructions from under the hood (bumper, axle covers, etc) and try starting the car again. If the problem persists, chances are higher that something is