If you’re experiencing a power steering assist fault in your Ford Explorer, there are a few things you can do to try and fix it. In this article, we’ll go over the most common fixes for this issue, alongside some tips to ensure that your car is as reliable as possible.
What is a Power Steering Assist Fault?
Power steering assist (PSA) is a system that helps drivers steer by using the power of the engine to assist with the movement of the steering wheel. When PSA malfunctions, it can cause difficulty in steering and decreased control over the vehicle.
There are a few different causes for PSA malfunctions, but most common is a failed or worn belt. If the belt is broken or has holes in it, it can cause excessive wear on the pulleys and gears that make up the PSA system. Over time, this can lead to problems with how smoothly the engine power gets transferred to the wheel, which can make it difficult to steer.
If you’re experiencing difficulty in steering or reduced control over your Ford Explorer, there are a few things you can do to try to fix the problem. First, check to see if there’s any obvious damage to your belt or pulleys. If there isn’t, you may need to replace your PSA belt as a first step. If there is obvious damage, you may be able to fix the issue by replacing some of the components in your PSA system. For example, if your belt is broken, you may be able to fix it by replacing the belt. If your pulleys are worn out, you may be able to replace them.
Symptoms of a Power Steering Assist Fault
Power steering assist (PSA) is a system that uses hydraulic pressure to help the driver steer the vehicle. When PSA malfunctions, it can cause difficulty steering and braking. Here are some common symptoms of PSA malfunctions:
-Difficulty maneuvering the vehicle in tight spaces
-Sudden loss of power steering
-Difficulty braking
If you’re experiencing one or more of these symptoms, it’s likely that your PSA is malfunctioning and needs to be replaced. Here are some steps to take to fix PSA fault in Ford Explorer:
1. Check the fluid levels in both the engine and PSA systems. Make sure the fluid levels are at their proper levels and replace any fluid that’s low or missing.
2. Inspect the hoses and cables connecting the PSA unit to the engine. Make sure they’re not kinked or pinched, and replace any damaged hoses or cables.
3. Check for any debris or foreign objects lodged in the hoses or valves of the PSA unit. Remove any obstructions if necessary, and clean all areas where debris could have collected.
How to Fix a Power Steering Assist Fault in a Ford Explorer
If you’re experiencing a power steering assist issue on your Ford Explorer, there are a few things you can do to try and fix the issue.
First, make sure you have the correct parts and tools to fix the issue. You’ll need a torque wrench, a socket set, and some ratchet straps. If your Explorer is already in the shop, be sure to bring along the VIN and vehicle identification number (VIN).
If you’re Able to Repair the Power Steering Assist Yourself, Follow These Steps:
1. Remove the four screws that hold the power steering unit cover in place. Note: The cover may also have clips that secure it to the chassis; if so, remove those as well.
2. Once the cover is off, take a look at the power steering unit itself. You’ll likely see two cables connected to it: one black and one blue. The black cable is responsible for transmitting power from the engine to the pump, while the blue cable controls fluid flow.
3. In order to fix the issue, first make sure that both cables are properly plugged into their respective connectors on the power steering unit. If they’re not, you’ll need to replace the cables.
4. Once the cables are plugged in, replace the cover and screws. Be sure to tighten them down evenly so that the power steering unit is properly secure.
5. Test the power steering assist by turning the wheel left and right. If everything seems fine, you can proceed to step 6.
6. If you’re still experiencing issues with the power steering, it may be due to an obstruction in the system. In this case, you’ll need to have a professional take a look at your Ford Explorer’s power steering system.
Conclusion
If you are encountering trouble steering your Ford Explorer, there is a good chance that the power steering assist is not working correctly.