When you’re out exploring the open world of Unturned, sometimes you’ll find yourself needing to get a car unstuck from a spot where it won’t budge. But how do you go about doing that without a car jack? In this guide, we’ll show you how to flip your car using just your hands!
What you need
If you want to flip a car without a car jack, then you will need: -A flat surface to park the car on -A pole or sturdy stick to use as a lever -Someone to help you push and pull the car
We’ll start by parking our car on a flat surface. We’ll use our pole or sturdy stick to lever the car off the ground. Next, we’ll need someone to help us push and pull the car. Once we have it flipped, we can remove our lever and safely park the car again.
How to do it
In this tutorial, we will show you a way to flip your car without the help of a car jack!
First, make sure you have the following items ready:
-A sturdy surface to place your car on
-A pair of heavy duty gloves
-An adjustable wrench
-A spade or shovel
-A Yellow Post It note or similar piece of paper
Second, start by removing the front tire and wheel. Next, remove the rear tire and wheel. Finally, remove the battery tray. These steps are necessary in order to get access to the suspension components.
Now that the car is ready for removal, it is time to get started! First, place your adjustable wrench around one of the suspension arms and turn it counterclockwise. This will loosen the suspension arm from the chassis. Once it has been loosened, use your spade or shovel to pry it off of the chassis. Be careful not to damage the vehicle in any way while doing this! Repeat this step for each arm.
Next, take your Yellow Post It note and write down the following information:
-The Year, Make, and Model of your car
–
Tips for success
When flipping a car in Unturned, there are several things that you need to keep in mind in order to ensure success. Below, we will outline some tips that can help you with your flip!
1. Make sure the car is in good condition
If the car is in poor condition, it will be difficult to flip it. Make sure the paint is intact, the windows are clean and the tires are inflated to their proper pressure.
2. Use a jack
If you don’t have a jack, you will not be able to flip the car. This is something that should always be prepared for before starting your flip!
3. Have supplies ready
Before starting your flip, make sure that you have all of the supplies that you need lying around. This includes a jack, ropes and straps. You may also want to have a bottle of lubricant handy in case of any problems.
4. Know your surroundings
Once you start flipping the car, it is important to know your surroundings. If there are any obstacles nearby, be sure to avoid them or use caution when doing so. Additionally, make sure that you know where the parking lot entrance and exit are so that you can quickly get back