One of the most common car maintenance tasks is flushing the brake system. When you put transmission fluid in your car, you should flush the brake system to prevent any possible problems. This guide will show you how to do it!
Brake fluid
When you change the transmission fluid in your car, be sure to flush the brake system as well. This will remove any old fluid and debris that may have built up over time, ensuring a safe driving experience.
How to flush the brake system
If you have recently put transmission fluid in your car, there is a very important step you need to take before driving: you need to flush the brake system. This step ensures that any debris that may be in the brake lines will be flushed out and away from your car’s braking system. Here’s how to do it:
1. Park your car in a safe location, with the engine off.
2. Remove the brake pads and disks.
3. If your car has ABS, disengage the system by pulling down on the handle on the left side of the steering column. (ABS systems are not typically equipped with flushing mechanisms.)
4. Connect a garden hose to the vehicle’s brake booster (if present) or to a readily accessible 3/4-inch adapter on the firewall near the master cylinder.
5. Turn on the water and wait 10 minutes for it to cool down before removing it from the hose.
6. Open each wheel well and remove any debris that may have collected inside.
7. Fill each brake line up to the top of its respective disk or booster chamber with fresh fluid, using a funnel if necessary. Be sure to use
How to avoid a brake system failure
Brake system failures can be a costly and time-consuming inconvenience. Here are a few tips to help prevent them:
1. Always flush the brake system after putting transmission fluid in it. This will remove any residual contaminants that could cause a failure.
2. Check the brake system regularly for signs of wear and tear. If there are any problems, repair or replace them as soon as possible to prevent a failure.
3. Make sure the brake system is properly lubricated and maintained. Brake fluid can wear out over time, causing the system to become less effective. Regularly check the level and condition of the brake fluid, and top it off as necessary.