Ford Escape owners may want to check the brake fluid level soon. According to a recent article on Complete Auto Care, brake fluid can become contaminated with moisture, which can cause the pedal to stick and the brake system to fail. Here are instructions on how to flush the brake system and check the brake fluid level in a Ford Escape.
How to Flush the Brake Fluid in a Ford Escape
If your Ford Escape’s brakes seem to be sticking or feel spongy, it’s time to flush the fluid. Here’s how:
1. Park the SUV on a level surface and turn off the engine.
2. Open the trunk and remove the brake fluid reservoir (see image below).
3. Remove the cap from the brake fluid reservoir. Note: The brake fluid reservoir is located on the passenger side of the vehicle and should not be accessed from the driver’s side.
4. Fill the reservoir with fresh brake fluid and replace the cap. Make sure to orient the serrated end of the cap so that it snaps into place (see image below).
5. Close the trunk and turn on the engine.
6. Apply pressure to the brake pedal and hold it down while you wait for the system to purge (about 10 minutes). Release pressure from the pedal when you see blue smoke coming from both rear calipers (see image below).
7. Replace any parts that have been contaminated with brake fluid, such as shoes, pads, or rotors. Reinstall any components that were removed during maintenance.
Warning Signs That the Brake Fluid Needs to Be Flushed
There are a few warning signs that suggest the brake fluid needs to be flushed. If you notice one or more of these warning signs, it’s important to take action and flush the brake fluid:
-The brake pedal feels spongy or mushy when pushed.
-The brake fluid level is low or dropping quickly.
-The ABS (Anti-lock Brake System) light is on.
-Brake noise is increasing or becoming louder.
How to flush the brake fluid in a Ford Escape
If you’re like most Ford Escape drivers, you’re probably wondering how to flush the brake fluid in your vehicle. Flushing the brake fluid is important not only for your safety, but also for keeping your brakes in good working order. Here’s how to do it:
1) Park your Ford Escape in a level position.
2) Remove the front wheels.
3) Open the hood of the Escape and locate the brake fluid reservoir (it’s usually on the right side of the engine).
4) Remove the cap from the brake fluid reservoir and wait until all of the brake fluid has been poured out.
5) Replace the cap on the brake fluid reservoir and close the hood of the Escape.
6) Reinstall the front wheels on your Ford Escape.
Pros and Cons of Flushing the Brake Fluid
There are pros and cons to flushing the brake fluid in a Ford Escape. The benefits of flushing the brake fluid include keeping components working properly, preventing corrosion, and ensuring proper braking performance. The downside to flushing the brake fluid is that it can be expensive and time-consuming.
Maintenance Tips for Your Ford Escape
If you’re like most Ford Escape owners, you probably don’t think much about your brake fluid. And you definitely don’t think about it when it’s time to flush it. But there are some important things to know about brake fluid flushing and how to do it properly in a Ford Escape.