If your car’s auxiliary jack isn’t working properly, don’t waste your time trying to force it out – you’ll just end up damaging the jack and the car. Here’s how to get a broken aux jack out of a car quickly and painlessly.
The Problem
A broken aux jack can be a major inconvenience. In this article, we’ll show you how to get it out of your car.
The Problem
If your aux jack is broken, you’ll need to get it fixed or replaced. Thankfully, getting it fixed is usually a much easier task than replacing it. Here’s how to do it:
1. Locate the broken aux jack. If you’re having trouble finding it, try looking inside your vehicle under the car hood or in the cargo area. It should be relatively easy to spot if it’s located near any electrical components.
2. Remove the broken aux jack from your car. If it’s attached to anything else inside your vehicle, remove that as well before taking it out.
3. Replace the broken aux jack with a new one. Once you have the broken one removed, replace it with a new one using the same installation instructions that you followed when replacing an electrical component in your car.
The Solution
If your aux jack is not working, there are a few things that you can do to try and get it fixed. The first thing to do is to find out what the problem is. Inspect the cord and make sure that it is not frayed or broken. If the cord is intact, then you may need to take the car to a mechanic to have the aux jack replaced.
If the aux jack is not damaged, there are a few things that you can do to try and fix it yourself. First, you can try using a plunger to suction onto the cord and pull. If this does not work, you can try using a breaker bar to remove the screws that hold the aux jack in place.
How To Do It Yourself
If you’re like most people, at some point you’ve probably broken or lost an aux jack in your car.
Luckily, there’s no need to call a tow truck – you can fix it yourself!
1. Start by locating the aux jack in your car. It’s usually located near the back of the vehicle on the passenger side.
2. Locate the retracting cable that connects the aux jack to the car’s electrical system.
3. Disconnect the cable from the aux jack.
4. Remove any screws or bolts that may be holding down the auxiliary jack housing.
5. Remove the aux jack housing by pulling it off of its mounting bracket.
6. Inspect the auxiliary jack for damage and replace any parts that are damaged or missing.
7. Reinstall the housing onto the mounting bracket and screw it in place.
8. Connect the cable from the auxiliary jack to the car’s electrical system and test it to make sure it functions properly.
Conclusion
If you’re experiencing difficulty getting a broken aux jack out of your car, there are a few simple steps that may help. First, make sure to turn off the car and all electrical accessories before beginning. Next, use a breaker bar to pry up on the bottom of the auxiliary jack housing until it pops loose. Once it’s free, gently pull it out from the plug socket. Be careful not to damage the housing or plugs in the process!