When it comes to cars, nothing is more frustrating than trying to start it and having nothing happen. Suddenly, your car just refuses to turn over. It could be anything from a dead battery to a faulty ignition switch. In this blog post, we will explore the different causes and symptoms of a bad ignition switch, along with some tips on how to fix it if you find yourself in this situation.
Overview
If your car won’t start with a good ignition switch, there are a few things you can try. First, check the battery to make sure it’s properly connected and has enough power. If the battery is good, try replacing the ignition switch. If that doesn’t work, check the fuses in your car.
Checking for Bad Ignition Switch
If you have a car that will not start, there is a good chance that the ignition switch is bad. To check for bad ignition switch, first make sure the car is not in gear. Next, connect a multimeter to the battery and turn on the car. Touch one lead of the meter to the positive battery terminal and touch the other lead to the negative battery terminal. If there is enough voltage present, the meter will indicate a reading. If there is no voltage present, then the ignition switch is probably bad and needs to be replaced.
Repairing a Bad Ignition Switch
If your car won’t start with the key in the ignition, there’s a good chance that the ignition switch is bad. This simple repair can get you back on the road in no time. The first step is to determine if your car has a manual or automatic transmission. If it’s an automatic, you’ll need to remove the battery before proceeding. Next, you’ll need a replacement ignition switch. Be sure to get one that matches your car’s make and model. Once you have the new switch, take the following steps: Disconnect the electrical connector on top of the switch
Remove two screws that hold down the metal cover
Lift up the cover and replace the switch
Putting the Car Into Drive After Repatching the Ignition Switch
When you experience a car that will not start, one of the first things you may do is try to jumper the battery. If this doesn’t work and the car has been fully drained, your next step may be to check the ignition switch.
There are three main types of ignition switches: manual, automatic, and dual-power. Dual-power switches allow the car to start in either automatic or manual mode. Manual switches are generally easier to replace than automatic ones, but automatic switches are becoming more common.
If you have an automatic switch, it’s likely that your car will need a new key to start. If you have a manual switch, you can usually just put the car into drive and it should start right up. However, if your switch is old or damaged, putting the car into drive may not work at all. In that case, you’ll need to replace the switch.
Putting the Car into Reverse After Repatching the Ignition Switch
If your car won’t start after repatching the ignition switch, try putting it into reverse. This can sometimes jump-start the engine. If that doesn’t work, you’ll need to bring the car in for repairs.
Putting the Car into Park After Repatching the Ignition Switch
If your car won’t start after you’ve replaced the ignition switch, there are a few things you can do to try and get it started. First, check to see if the battery is dead. If it’s not, try turning the key all the way off and then on again. If that doesn’t work, check to see if anything is blocking the spark from getting to the engine. You might have a bad wire somewhere in your circuit. Lastly, if none of those solutions work, you can try putting the car into park and hitting the gas pedal again. This will help crank up the engine and hopefully start it up.