Black plastic is one of those materials that’s hard to get off without damaging the surface. In fact, it’s usually impossible to remove car wax with just water and a cloth. That’s why car wax residue can be so frustrating—it’s often difficult to remove without scrubbing or sanding. Luckily, there are a few tricks you can use to get that wax residue off black plastic. In this blog post, we walk you through the steps necessary to get rid of car wax on black plastic. Read on to learn how to get car wax off black plastic!
What You’ll Need
-A bucket
-Wax
-Clothesline
-Broom
-Paint scraper
-501 cleaner
-Microfiber cloth
-Cold water
1. Obtain a bucket and fill it with cold water. Note: If the car is covered in snow or ice, be sure to first melt the ice or snow before waxing the car.
2. Wax the car using a liberal amount of wax. Be sure to use a wax that is specifically designed for plastic surfaces, as regular car wax will not work well on black plastic.
3. Strip away any excess wax with a paint scraper, then wash the car with 501 cleaner and a microfiber cloth in cold water. Dry off the car thoroughly before applying another coat of wax.
How to Remove Car Wax
If you have black plastic in your car, it’s time to get car wax off. There are a few ways to go about this, but the easiest is to use a hairdryer. Just set it on low and direct the heat onto the wax. It will start melting and you can then scrub off the wax with a cloth or a sponge. If that doesn’t work, you can use a degreaser. Just spray it on and wait until it starts to foamy before scrubbing off the wax. Finally, if all else fails, you can use brute force and soak the entire area in boiling water for 30 minutes. This will loosen any remaining wax and you can then wipe it clean.
Tips for Successful Car Wax Removal
1. Take your time. Waxing a car can be a long and arduous process, so don’t try to rush it.
2. Use a soft cloth or rag to slowly remove the wax from the surface of the car.
3. If you’re using a cleaner/wax stripper, begin by spraying it on one side of the cloth or rag, then gently pressing it against the waxed area on the car. Watch for bubbles forming and release them with your finger when they do; this is an indication that the cleaner is working well.
4. Continue rubbing until all of the wax has been removed. Then use a clean cloth or rag to dry off the area.
5. Finally, apply a protection coat of sealant if desired (we recommend Meguiar’s Ultimate Paste Wax).
Conclusion
Getting car wax off black plastic can be a pain, but there are a few tricks you can use to make the process easier. First and foremost, use warm water and soap to clean the surface of the plastic. Next, scrub the area with a stiff-bristled brush until the wax is gone. Finally, rinse the area thoroughly with cold water to stop the wax from hardening.