Sometimes, even the simplest things can become a hassle when you’re trying to get your car started. In this article, we’ll show you how to get key unstuck from car ignition in under two minutes – so you can get on your way and avoid any costly repairs.
What You’ll Need
Before you can try any methods to get the key unstuck from the car ignition, you’ll need some supplies. You’ll need a jack, a wrench, and a lug wrench.
Start by removing the wheel from the car. Make sure to keep the jack balanced so you don’t tip it over while you’re working. Once the wheel is off, use the wrench to unscrew the bolt that holds the Ignition Switch in place.
Now pull out the switch and set it aside. Use the lug wrench to unscrew the two bolts that hold the Ignition Coil in place. The coil should come off easily once you’ve unscrewed these two bolts.
Next, use the jack to raise up one side of the ignition switch cover. This will give you easier access to the key. Pop off the key with your hands (being careful not to lose it) and replace it with a new one. screwed back on in reverse order (start with bolt on top and work your way down).
Reattach everything by reversing the steps you took earlier. Be sure to check all of your connections carefully before you drive away – you don’t want to end up stuck on the side of the
How To Do It
If your car won’t start because the key won’t turn, don’t fret – there are a few simple steps you can take to get it unstuck.
The first thing you’ll want to do is make sure that the key is actually in the ignition. If the key isn’t in the ignition, you won’t be able to turn it. Next, try turning the key all the way to the left or right – this should move the gearbox into Neutral. Now try turning the key back to the center and pulling it out – if your car starts now, you know that the key was actually in the ignition and wasn’t just stuck. If your car still doesn’t start, there’s a chance that your battery is dead. Try jumpstarting your car – if that doesn’t work, your car may need a new battery.
Things To Keep In Mind
If you’re having trouble getting your car’s key unstuck from the ignition, there are a few things to keep in mind.
First, make sure the key is turned all the way in. If it’s not, turn it until it is.
Second, try using a wrench or screwdriver to pry up on the key from below instead of using your hands. This can help break the connection between the key and the ignition.
Third, if those methods don’t work, try spraying some WD-40 onto the key and inserting it into the ignition again. The lubricant will help break the connection and get your car started.